Power Supply - Ac Adapter - CyberHome LDV 702 Owner's Manual

Power Supply (1)
1
Using the AC adapter
You can use AC Power to conserve your battery usage if there is a household AC Outlet nearby. Once AC
Power is applied, the unit will be in STANDBY Mode. STANDBY mode lets you awake system quickly by using
the remote control POWER Button, or the unit's ON button.
1
Connect the Power Plug into the Power Jack
Plug the Power Plug firmly into the DC IN 10 V Power Jack on
the Left Side of the unit.
2
Connecting the AC Power Cord to the Adapter
Plug the Power Cord into the AC Adapter.
3
Plug in to Wall Power Outlet
Plug the Power Cord to the Adapter and the other end of the
Power Cord into a household wall Power Outlet.
Quick Tips
Once Power is applied, the
unit will be in STANDBY
mode. (See pg 18)
The unit consumes 0.3W
when it is in STANDBY Mode.
If the unit will not be used for
a long time, unplug the AC
Outlet.
We recommend Removing
the Battery Pack when using
the AC adapter.
13
Right Side of Unit
1
2
3