Download Print this page

Nubert nuPro XS-8500 RC Quick Start Manual

Hide thumbs Also See for nuPro XS-8500 RC:

Advertisement

Quick Links

The latest operating instructions and other
helpful information can be found here:
www.nubert.de/en/downloads
1
Setup
Caution! Make sure not to scratch the speaker! Do not let anything fall into the box through the bass reflex tubes!
Place the soundbase at the intended location. Here are some tips:
Bass reflex openings, sound
The rear arrangement of the bass reflex openings requires the XS-8500
RC to have at least a 5-centimeter distance from the back wall to ensure
smooth operation and avoid airflow noise. A generous distance from
the wall—also to the side—reduces bass and midrange overemphasis.
When placed on shelves, the best sound is achieved when the front
edge of the box aligns with the shelf edges or even protrudes slightly.
nuPro XS-8500 RC · Quick start guide · 07 / 2024
nuPro
Bass reflex openings
XS-8500 RC
Quick start guide
Speaker feet
The nuPro XS-8500 RC comes with vibration-absorbing feet. These also
ensure the necessary floor clearance due to the downward-facing sub-
woofer chassis. The soundbase cannot be set up without the feet.
Height adjustment
To allow for adjustments on uneven surfaces, the mini-spikes can be
slightly unscrewed.
Subwoofer chassis
1
Stand feet with
mini-spikes

Advertisement

loading
Need help?

Need help?

Do you have a question about the nuPro XS-8500 RC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Nubert nuPro XS-8500 RC

  • Page 1 When placed on shelves, the best sound is achieved when the front slightly unscrewed. edge of the box aligns with the shelf edges or even protrudes slightly. Subwoofer chassis Stand feet with mini-spikes Bass reflex openings nuPro XS-8500 RC · Quick start guide · 07 / 2024...
  • Page 2 Optical 1 Digital Port Optical 2 By repeatedly pressing the mode button, you can select different sound/surround modes such as Stereo, Dolby Surround Movie, or voice+ for speech optimization. nuPro XS-8500 RC · Quick start guide · 07 / 2024...
  • Page 3 If you have connected to the Slave speaker, an error message will appear. Simply select the Master speaker. By tapping on the Nubert Logo, you can switch between the two operating levels. You can use the basic functions similar to the remote control or access the speaker's menu.
  • Page 4 +/− 10 dB can be set using the X-Remote App. Navigate to > sound > surround system. ® Nubert electronic GmbH · Nubertstr. 1 · D-73529 Schwäbisch Gmünd · www.nubert.de · info@nubert.de · Hotline +49 (0) 7171 8712-0 nuPro XS-8500 RC · Quick start guide · 07 / 2024...