Hence our tip: When your new speakers arrive on a cold winter’s day, just General information give them a few hours to acclimatise. Your Nubert speakers will thank you with the superior sound quality you have come to expect from us.
• No objects or foreign bodies may get into the device. • Should the loudspeaker come into contact with liquids or should objects have got inside, please unplug the mains plug immediately and contact Nubert elec- Danger! Leaking or exploding batteries can pose a health hazard and cause damage to tronic GmbH (info@nubert.de)!
Setup with cloth grille with battery The nuPro A-600 are high-quality, very neutral fully active Hi-Fi/ studio/multimedia loudspeakers (3-way bass reflex system). They impress with an extremely homogeneous, precise, and “direct” sound reproduction with the finest resolution in the entire frequency spectrum.
Page 5
You will find a service connector under the rubber cover. to conveniently power various devices (e.g. smartphones) The cover may be removed by authorized Nubert-techni- or wireless radio receivers directly from the A-600. cians only. There are no user-serviceable parts below the...
A-600 · 4/2020 EN USB-connection to a computer Your nuPro aktive speaker can be used as a high quality, plug-and- play compatible USB interface. n Windows Under current windows versions, you need to set the nuPro speaker as the default playback device manually when connecting it to your computer for the first time.
EN 4/2020 · nuPro A-600 Remote Control The remote control of the nuPro allows direct access to all common- ly used functions: n on With this key, you toggle the speaker between active and stand-by mode. n volume and mute The volume can be adjusted with the volume keys, the mute key allows you to mute and unmute the speakers.
Page 8
A-600 · 4/2020 EN MENU Configuring your nuPro loudspeakers n SYS HP (High-pass and crossover frequency) When the nuPro are powered on, they automatically configure In this menu, you can set the high-pass (lo-cut) filter frequency. themselves as as Master- or Slave-loudspeaker, depending on the This is particularly useful if you connect a subwoofer to your nuPro cabling.
Page 9
If you have any questions or problems during the commissioning of Improper handling of the speaker may result in damage. your Nubert system, please do not hesitate to contact our service • Always unplug the speaker before cleaning it! team: •...
Page 10
A-600 · 4/2020 EN Menu Sitemap Note: to start navigating, press / Keys / Keys Notes VOLUME Vol 80 or V -00 dB Press-and-hold the menu button to toggle the display mode or...
Page 11
EN 4/2020 · nuPro A-600 Note: to start navigating, press / Keys / Keys Notes SETUP PAIR Automatic master / slave configuration, link out outputs only one channel or MENU SINGLE No master / slave configuration, link out outputs a stereo signal...
Old appliances can also be returned to us directly in our shops or shipped back to us for disposal. Please send an Email to info@nubert.de for a free return shipping label.
Need help?
Do you have a question about the nuPro A-600 and is the answer not in the manual?
Questions and answers