Page 1
XS-3000/4000 RC Quickstart guide The latest operating instructions and other helpful information can be found here: https://www.nubert.de/en/downloads-nupro-xs-3000-4000-rc Cable connections Please connect all sources and the optional sub- woofer to one of the two speakers of the stereo pair. Analogue XLR connection: Here, as an exception, each loudspeaker is supplied with the corresponding signal separately.
Page 2
Master-slave connection The speaker you connected your sources to must The master speaker controls and passes the correct audio signal on to the second (slave-)speaker. be set as the Master speaker. In order to achieve this, the speakers must be connected to each other.
Page 3
Channel selection ➀ Finally, you may have to change the default channel -30dB < > coax 1 settings. If the left speaker is your Master speaker, you can skip this step. < ➁ volume < > If your Master speaker is the right speaker you need to change the settings as follows: ➀...
Page 4
The latter menu is identical to that on the speaker itself. Screenshots: App V1.3 ® Nubert electronic GmbH · Nubertstr. 1 · D-73529 Schwäbisch Gmünd · www.nubert.de · info@nubert.de · Hotline: +49 7171 8712-0 nuPro XS-3000 / 4000 RC · Quickstart guide E12 · 02/2024...
Need help?
Do you have a question about the nuPro XS-4000 RC and is the answer not in the manual?
Questions and answers