Download Print this page
Sealey LED1800PB Instructions
Sealey LED1800PB Instructions

Sealey LED1800PB Instructions

20w smd led rechargeable portable floodlight & power bank

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
1.1.
GENERAL
Ensure the lamp is fully charged before initial use.
9
DO NOT turn the lamp on when it is being charged.
8
DO NOT shine directly into your, other person's or an animal's eyes.
8
DO NOT allow children to use the lamp.
8
DO NOT handle or move the lamp whilst it is being charged.
8
DO NOT use the lamp if you suspect that the battery, the lamp casing or the cable is damaged. Consult your Sealey Stockist.
8
DO NOT leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery,
8
subsequently recharge the battery at least once every six months of non-use.
1.2.
BATTERY SAFETY
WARNING! To reduce the risk of burns or fire:
DO NOT Attempt to open, dismantle, modify or service the battery pack.
8
DO NOT Crush, puncture, short external contacts or dispose of in fire or water.
8
DO NOT Expose to temperatures above 40°C or below -10°C.
8
DO NOT Expose to direct sunlight for long periods of time.
8
DO NOT Expose to moisture.
8
DO NOT place the lamp face down while in use.
8
Replace only with the battery pack designated for this product.
9
Recycle or dispose of used battery as stipulated by local regulation.
9
If the electrolyte in the cells gets on your skin, wash thoroughly with soap and water. If it gets in your eyes, rinse thoroughly with
9
cool water and seek immediate medical attention.
2. INTRODUCTION
Super bright 20W SMD Led light produces 1800 lumens with three brightness settings. Built-in power bank with 5V 1A USB output
for providing power on the go. Work-light base can be rotated to provide light at any angle. The stand also features strong magnets
so the light can be attached to any ferrous surface and a fold out hook in the stand base can be used to hang the work-light. Ø6mm
tripod mount can be used for simple positioning of light and hands-free operation, compatible with Sealey TRI01 1.5m Telescopic
Tripod. 3.7V 4Ah lithium-ion battery for longer life, no memory effect and a much slower discharge than traditional Ni-MH batteries.
Lightweight unit folds flat and is very easy to transport making it ideal for industrial, professional and domestic use.
3. SPECIFICATION
Model no:
Battery:
Charging Time:
IP Rating:
LED Type:
Lumen Output:
Nett Weight:
Operating Time:
Power:
Supply:
USB Output:
© Jack Sealey Limited
20W SMD LED RECHARGEABLE PORTABLE
FLOODLIGHT & POWER BANK
LED1800PB
MODEL NO:
LED1800PB
3.7V 4Ah Lithium-Ion
6hr
IP44
20W
1800 lm
0.735kg
Max/Med/Low: 1/2/4hr
20W
5V ⎓ 1A
DC
Original Language Version
LED1800PB Issue 2 09/08/2024

Advertisement

loading
Need help?

Need help?

Do you have a question about the LED1800PB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sealey LED1800PB

  • Page 1 DO NOT handle or move the lamp whilst it is being charged. DO NOT use the lamp if you suspect that the battery, the lamp casing or the cable is damaged. Consult your Sealey Stockist. DO NOT leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently recharge the battery at least once every six months of non-use.
  • Page 2 BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.