Installing The Software Onto Your Computer; Before Installing The Software - Aiwa AM-NX1 Operating Instructions Manual

Installing the software onto your computer

This section explains the installation of the SonicStage Ver.1.5 software supplied with your
Net MD.

Before installing the software

1 Make sure to note the following before installing the software.
Do not connect the dedicated USB cable before the installation!
The SonicStage software may not correctly load or operate if the dedicated USB
cable is connected to your computer during the installation.
Close all other Windows applications before starting the installation!
Make sure to close any virus-check software, as such software usually demand large
amounts of system resources.
2 Depending on the following operating system or software already installed
on your computer, refer to the reference pages before installing the
software.
Windows XP
Windows Millennium Edition
Windows 2000
OpenMG Jukebox,
SonicStage, SonicStage
Premium, or SonicStage
Simple Burner
46
, page 60
, page 61
, page 61
, page 62
• To install this software, you must log on with a
user name with "Computer Administrator".
• If you perform the "System Restore" function in
the Windows "System Tools" menu, the tracks
managed by SonicStage may become corrupted
and rendered unplayable.
• If you perform the "System Restore" function of
the Windows "System Tools" menu, the tracks
managed by SonicStage may become corrupted
and rendered unplayable.
• You must log on as "Administrator" before
installing the software.
• Depending on the version of your software, the
existing software may be overwritten by the new
version or it may co-exist with SonicStage
Ver.1.5. As the installation process will depend
on the version, see the reference page for details.