Cobra MRF80B Owner's Manual page 55

8187-F80-Operation-8_MMB:F75-Operation-8
Operating Your Radio Introduction
SAME Codes and Edit List
SAME Event Code Alert
52 English
12/29/06
NOAA All Hazards/Weather
Radio and Alert, w/SAME Product Features
3. Turn the Channel knob to select alert ON.
4. Depress the Enter button and select YES to set the
same alert.
NOTE
The Weather channels may be turned Off, while
the SAME area code alerts are On or any combination
of On or Off.
5. Turn the Channel knob to select EDIT. Press Enter
button.
6. Turn the Channel knob or press the Function (F1, F2)
buttons on the radio to select the SAME alert code
number (1-10) you wish to program.
7. Press the Enter button to start entering the SAME code
number. First number entry location will start to blink.
8. Turn the Channel knob or press the Channel Up/Down
buttons on the microphone to enter the six (6) digit
SAME code number you want to enter.
9. Use the Function (F1, F2) buttons on the radio to move
to the next or previous number. Repeat steps 7 and 8
until all six digits have been entered.
10. Press the Enter button to complete the code entry.
11. Move the selection arrow to NEXT to set another SAME
alert channel. If desired. Ten total codes can be
programmed.
12. When the changes are complete, exit the WX/SAME
menu and return to the Setup menu.
9:03 AM Page 52