Cobra MRF80B Owner's Manual page 54

8187-F80-Operation-8_MMB:F75-Operation-8
Introduction
SAME Alert
WX/SAME Menus
12/29/06
NOAA All Hazards/Weather
Radio and Alert, w/SAME
NOTE
The symbol will appear on the top of the display
when the weather alert is turned On.
Specific Area Message Encoding (SAME)
The SAME weather alert allows listeners and EAS
(Emergency Alert System) participants to filter the National
Weather Radio (NWR) broadcast of warnings and emergency
alerts to receive only messages and information for your
selected local geographic area.
The Weather Alert must be turned On for the SAME alert
code to be set. The SAME alert requires that a specific six (6)
digit code be programmed into this radio. To program this
SAME receiver with the proper county(s) and marine areas(s)
of choice, you need to know the 6 digit SAME code
number(s) for the county(s). This setting allows up to 10
available codes that may be set up in any order. Any of the
codes may be turned On or Off for specific weather area
information to be listed.
NOTE
You can obtain online information at
http://www.nws.noaa.gov/nwr/same.htm#program or
by telephone at 1-888-NWR-SAME (1-888-697-7263)
to program the SAME alert into this radio.
General SAME Information:
County codes:
http://www.nws.noaa.gov/nwr/index.htm
Marine coverage:
http://www.nws.noaa.gov/om/marine/marsame.htm
To Set the SAME Weather Alert:
1. Enter the Setup menu and scroll to the WX/SAME
(weather alert) menu.
2. Press the Enter button and observe the current weather
alert setting – ON, OFF or EXIT.
9:03 AM Page 51
Nothing Comes Close to a Cobra ® 51