Easy Set Up; Screen Settings; Brightness And Volume Control; Brightness Control - Cobra GPSM7700 Quick Start Manual

2. Easy Set Up

Screen settings - There are a number of map views or different types of information that
can be displayed on the screen at any one time:
3D
Current time or vehicle speed
0:33
LEFT
Estimated journey time or Estimated time of arrival
Direction and name of road
To modify the information shown access the Menu by simply touching the 7700 Pro in
the center of the screen with your finger and then press the 'Configure' button.
Next press the icon where you will see the list of options
2D North
89
MILES
Distance to destination
20:33
PM
GPS Signal strength Battery status
12
To change a setting press it with your finger and a list of the available options will be
shown next to a check box. Simply press the check box to indicate which option you
would like to choose.
Press 'OK' at the bottom of the screen. Your chosen settings will now be saved and will
appear on the screen each time you use your 7700 Pro. If you want to switch between
your Current Speed and the Atomic Clock or the Estimated Time of Arrival and the Time
to Destination during your journey simply touch the LCD screen where either piece of
information is displayed and the unit will display the alternative setting and vice versa.
However, each time you switch on the device the original setting will be displayed.
Brightness and Volume Control - Both the volume and screen brightness can be
adjusted within the 'Configure' Menu. To set either function touch the screen in the center
with your finger and then press the 'Configure' button. The screen will then display a
number of different icons.
Brightness Control - Press the
Pro enables you to adjust the brightness of the display
and save three brightness settings: one for driving
during the day, one for driving at night and Auto
Mode. The unit's default setting is AUTO. When AUTO
is checked, the unit will automatically toggle between
DAY and NIGHT modes based on the sunset and sunrise.
To set the daytime brightness select 'DAY' by checking the tick box with your finger and
then using the '+' and '-' buttons to adjust the setting. To set the 'NIGHT' setting, simply
check the tick box with your finger for 'NIGHT' and follow the same procedure. Once you
have selected the desired brightness press the 'OK' button at the bottom of the screen.
icon. The 7700
13