Modifying Rtsp; Defining Multiple Spanning Tree - Cisco SFE1000P Administration Manual

Modifying RTSP

1. Click Bridging > Spanning Tree > RSTP. The RSTP Page opens:
2. Click the Edit button. The Edit Rapid Spanning Tree Page opens:
3. Define the relevant fields.
4. Click Apply. The Rapid Spanning Tree Settings are modified, and the device is updated.

Defining Multiple Spanning Tree

MSTP provides differing load balancing scenarios. For example, while port A is blocked in one STP
instance, the same port is placed in the Forwarding State in another STP instance. The MSTP
Properties page contains information for defining global MSTP settings, including region names,
MSTP revisions, and maximum hops.
The MSTP section contains the following pages:
• Defining MSTP Properties
• Mapping MSTP Instances to VLAN
• Defining MSTP Instance Settings
• Defining MSTP Interface Settings
Chapter 11: Configuring Spanning Tree
Defining Multiple Spanning Tree
SFE1000P Gigabit Ethernet Switch Administration Guide
Edit Rapid Spanning Tree Page
Chapter
11
79