Mapping Dns Hosts - Cisco SFE1000P Administration Manual

Mapping DNS Hosts

The Host Mapping Page provides information for defining DNS Host Mapping.
1. Click System > System Management > Domain Name System > Host Mapping. The Host
Mapping Page opens:
2. Click the Add button. The Add DNS Host Page opens:
The Add DNS Host Page provides information for defining DNS Host Mapping.
3. Define the relevant fields.
4. Click Apply. The DNS Host settings are defined, and the device is updated.
Chapter 8: Configuring IP Information
Domain Name System
SFE1000P Gigabit Ethernet Switch Administration Guide
Host Mapping Page
Add DNS Host Page
Chapter
8
62