Download Print this page
PotteryBarn NEWPORT Assembly Instructions Manual

PotteryBarn NEWPORT Assembly Instructions Manual

Sink console single
Hide thumbs Also See for NEWPORT:

Advertisement

Quick Links

NEWPORT SINK CONSOLE SINGLE
Date: 18-Mar-15
www. potterybarn.com
Page 1 of 10
Rev:

Advertisement

loading
Need help?

Need help?

Do you have a question about the NEWPORT and is the answer not in the manual?

Questions and answers

Summary of Contents for PotteryBarn NEWPORT

  • Page 1 NEWPORT SINK CONSOLE SINGLE Date: 18-Mar-15 www. potterybarn.com Page 1 of 10 Rev:...
  • Page 2 Carrying natural stone flat WILL cause them to crack or break. • Place top as close as possible to the final desired location. • NOTE: Avoid moving the top after it has been set into place. • Date: 18-Mar-15 www. potterybarn.com Page 2 of 10 Rev:...
  • Page 3 Note: Some cutting and drilling may be necessary to mount console base to wall or to shape shelves for under-sink hardware or plumbing. Parts Included: Basin Marble Top Back Splash Console Base Bottom Frame Foot Date: 18-Mar-15 www. potterybarn.com Page 3 of 10 Rev:...
  • Page 4 Use open wrench to tighten nut to set anchor in place. This nut is used to prevent damaging the bolt. After installation, remove and follow step 5. Date: 18-Mar-15 www. potterybarn.com Page 4 of 10 Marble Top Rev:...
  • Page 5 Immediately wipe away any excessive sealant. Place the Console Base (D) upside down on a carpet or scratch free surface. Secure the Legs (E) to the Base (D) by turning clockwise Date: 18-Mar-15 www. potterybarn.com Page 5 of 10 Rev:...
  • Page 6 Turn the Bottom Frame (F) upside down as shown. Align the holes on bottom frame to the holes on Legs. Secure the Feet (G) to the Bottom Frame (F) by turning clockwise Date: 18-Mar-15 www. potterybarn.com Page 6 of 10 Rev:...
  • Page 7 Now, secure the basin tightly. Caution: For safe handling, 2-3 people are recommended. Note: Always carry any natural stone vertically. Carrying stone products flat may cause cracking or breakage. Date: 18-Mar-15 www. potterybarn.com Page 7 of 10 Rev:...
  • Page 8 Avoid moving the top after it has been set into place. Allow the top to dry a minimum of 24 hours to allow for proper adhesion to the console. Date: 18-Mar-15 www. potterybarn.com Page 8 of 10 Rev:...
  • Page 9 Placing protective pads on the bottom of any heavy objects will help prevent scratching of the marble surface. Do not place extremely heavy items on the marble top. Thank you for your purchase Stores | catalog Date: 18-Mar-15 www. potterybarn.com Page 9 of 10 Rev:...
  • Page 10 NEWPORT SINK CONSOLE SINGLE 254 mm= from side of marble top to side of basin 457 mm= from side of marble top to basin drain hole 387 mm= from front of marble top to basin drain hole 131 mm= from front of marble top to front of basin...