Transporting The Projector - Epson EH-QL3000W User Manual

7. Copy the downloaded firmware file onto the root (top) directory of the projector's removable drive.
Note: Do not rename the firmware file.
8. Safely remove the projector's removable drive from the computer, then disconnect the USB cable
from the projector.
The firmware update starts.
While the firmware is updating, the status indicators on the projector start flashing. After the update is
complete, the projector enters standby mode. If Direct Power On is enabled, the projector restarts
automatically.
Note: If all status indicators flash rapidly, the firmware update may have failed. Disconnect and
reconnect the projector's power cord. If the indicators continue to flash even after reconnecting the
power cord, unplug the cord from the electrical outlet and contact Epson Support.
After the update is complete, check the Version setting in the Information menu to confirm that the
firmware was updated successfully.
Parent topic:

Transporting the Projector

The projector contains precision parts, some of which are glass. Follow these guidelines to transport,
ship, or store the projector safely.
• Remove any equipment connected to the projector.
• Remove the lens and attach the protective cover that was on the lens mount when you purchased the
projector.
Note: Do not transport the projector with the lens installed. Doing so could damage the projector and
the lens.
• Do not hold the protective lens cover or the lens unit when moving the projector; they may become
disconnected and the projector may fall, which could cause an injury.
• When transporting the projector a long distance or as checked luggage, pack it in a firm box with
cushioning around it and mark the box "Fragile."
• When shipping the projector for repairs, place it in its original packing materials, if possible, or use
equivalent materials with cushioning around the projector. Mark the box "Fragile."
Updating the Firmware
202