Setting The Sleep Timer - Aiwa CSD-TD55 Operating Instructions Manual

(CSD-TD59 only)
RECORDING
1
Insert a tape with the side to be recorded
on facing out and the exposed side facing
down.
2
Get ready to record from the source.
To record from a CD, press CD and load the disc.
To record from a radio broadcast, press
RADIO BAND and tune to a station.
3
Press REC.
The unit enters recording pause mode and "REC"
flashes slowly in the display.
4
Press e to start recording.
"REC" lights up in the display.
When the selected function is CD, CD play and
recording starts simultaneously.
To record only the selected tracks of a CD
1 Follow steps 1 to 4 of PROGRAMMED PLAY on
page 9 to program tracks.
2 Press REC.
3 Press e.
To stop recording, press s.
To pause recording (only when the source is RADIO),
press e. During recording pause mode, "REC"
flashes slowly. To resume, press it again.
To erase recording, press TAPE and start recording
(press REC then e).
After recording, press POWER 6 STANDBY/ON to
turn the power off.

SETTING THE SLEEP TIMER

The unit can be turned off automatically at a
specified time.
1
Hold down REPEAT/MODE/SLEEP *
until "SLEEP" flashes in the display.
* or MODE on the remote control (CSD-TD59
only)
2
Within 4 seconds, press f or g to
specify the time until the power is
turned off.
Each time it is pressed, the time changes
between 10 and 180 minutes in 10-minute
steps.
While the sleep timer works, "SLEEP" is
displayed.
To check the time remaining until the power
is turned off
Repeat step 1 shown above. The remaining time is
displayed for 4 seconds.
To cancel the sleep timer
Repeat step 1 to display the remaining time and
hold down REPEAT/MODE/SLEEP again until
"OFF" is displayed.
Simple sleep timer setting
Press REPEAT/MODE/SLEEP while the power is
off. The unit is turned on with the last function, and
the sleep timer is automatically turned on with the
30-minute setting.
Select the function, if you need, and start playback.
To prevent accidental erasure
Break off the plastic tabs on the cassette tape with a
screwdriver or other pointed tool after recording.
To record on the tape again
Cover the tab openings with adhesive tape, etc.
Side A
Specified time
Tab for side A
ENGLISH
11