® AeroVent Standard Aerosol Can Disposal System TABLE OF CONTENTS Precautionary Warnings ......Page 1 Thank you for purchasing the AeroVent Standard Aerosol Can Disposal System. Assembly ..........Page 2 Operation ..........Page 3 The AeroVent Standard has been designed to puncture and drain aerosol Maintenance .........
® AeroVent Standard Aerosol Can Disposal System Always consult your facility safety manager for particular safety protocols prior to operating this equipment. This unit is not intended for use with spray adhesives or expanding foam sealant products. PRECAUTIONARY WARNINGS • PLEASE read and understand all operation instructions as detailed in this manual.
® AeroVent Standard Aerosol Can Disposal System Operating Handle Your Box should include these parts Lid Handle Plunger Mounting Hardware • AeroVent with Ground Cable Set #7 Safe2Filter • Safe2Filter Filter Assembly • 5/16-18 x 3/4” Bolts (4) • ¼” Flat Washers (4) •...
® AeroVent Standard Aerosol Can Disposal System OPERATION 1. Using the can guide on the side of the unit, select the matching plunger (2”, 2.5” or 3”) 2. Lift the operating handle to release the clamp, and then open the AeroVent lid. 3.
® AeroVent Standard Aerosol Can Disposal System MAINTENANCE ITEM CHECK REPLACE/SERVICE Lubricate the surface with grease Lid Gasket Before each use regularly to keep the lid from sticking. Replace as needed Change every 60 days or 600 cans, or Safe2Filter Filter Monthly more often for full cans.
® AeroVent Standard Aerosol Can Disposal System COBALT PUNCTURE POINT REPLACEMENT HELPFUL HINT: Leave the AeroVent on the drum to replace the cobalt point. 1. Open the lid and then remove the left and right shrouds. 2. Loosen the bottom clamp on the bellows. Note: There is no need to loosen the top bellows clamp unless the bellows are damaged and need replaced.
18 (Eighteen) Months from the date of original purchase. In no event shall Newstripe be liable for incidental or consequential damages and no person had any authority to bind it to any representation or warranty. Newstripe is not responsible for work done, materials furnished, or repairs made by others without its specific written authorization.
Need help?
Do you have a question about the AeroVent 10004840 and is the answer not in the manual?
Questions and answers