Sony YY7863E Reference Manual

Wireless Speaker
Reference Guide
LinkBuds Speaker
5-060-904-41(1)
©2024 Sony Corporation
Printed in China
https://www.sony.net/
Model: YY7863E
The term "product" in this document refers to the unit or its accessories.
CAUTION: To avoid deterioration of the water-resistant performance,
make sure that the cap is closed completely when using the unit.
The nameplate and important information concerning safety are
attached in the following locations:
• the bottom of the unit
Do not install the product in a confined space, such as a bookcase or
built-in cabinet.
Do not expose the batteries (battery pack or batteries installed) to
excessive heat, such as sunshine, fire or the like, for a long time.
Do not subject the batteries to extreme low temperature conditions that
may result in overheating and thermal runaway.
Do not dismantle, open, or shred secondary batteries.
In the event of a secondary battery leaking, do not allow the liquid to
come in contact with the skin or eyes. If contact has been made, wash
the affected area with copious amounts of water and seek medical
advice.
Secondary batteries need to be charged before use. Always refer to
the manufacturer's instructions or product manual for proper charging
instructions.
After extended periods of storage, it may be necessary to charge and
discharge the secondary batteries several times to obtain maximum
performance.
Dispose of properly.
Charging this unit
Connect the USB AC adaptor to this unit using the USB Type-C® cable,
then connect the USB AC adaptor to an AC outlet.
Do not expose the unit to naked flame sources (for example, lighted
candles).
This unit has been tested and found to comply with the limits set out in
the EMC regulation using a connection cable shorter than 3 m.
This product must be installed and operated with at least 20 cm
separation between the radiating element and the human body
(excluding extremities: hands, wrists, feet and ankles).
Model: YY7863E
https://rd1.sony.net/help/
speaker/7863/h_zz/
This product has magnet(s) which may interfere with pacemakers,
programmable shunt valves for hydrocephalus treatment, or other
medical devices. Do not place this product close to persons who use
such medical devices. Consult your doctor before using this product if
you use any such medical device.
Never insert the USB plug when the main unit or charging cable is wet.
If the USB plug is inserted while the main unit or charging cable is wet,
a short circuit may occur due to liquid (tap water, seawater, soft drink,
etc.) or foreign matter on the main unit or charging cable, and cause
abnormal heat generation or malfunction.
Licenses
• This product contains software that Sony uses under a licensing
agreement with the owner of its copyright. We are obligated to
announce the contents of the agreement to customers under
requirement by the owner of copyright for the software. Please
access the following URL and read the contents of the license.
https://rd1.sony.net/help/speaker/sl/24/
• This product is protected by certain intellectual property rights
of Microsoft Corporation. Use or distribution of such technology
outside of this product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
• Services offered by third parties may be changed, suspended,
or terminated without prior notice. Sony does not bear any
responsibility in these sorts of situations.
Notes on water resistant
feature
(Read before using the unit)
The supplied accessories are not water resistant.
On water resistant performance of the unit
With the cap securely closed, this unit has a water resistant performance
equivalent to IPX4, which is a "protection against ingress of water" rating
defined by IEC 60529 "Degrees of protection provided by enclosures (IP
Code)" for electrical equipment.
• The supplied accessories and the connectors of this unit (USB) are not
water resistant. To reduce the risk of fires or electric shocks, do not
expose the unit to water or droplets while using any connectors (USB) .
Note that malfunctions as a result of water immersion or dust
intrusion caused by misuse by the customer are not covered by the
warranty.
To maintain water resistant performance
Carefully note the precautions below to ensure proper use of the unit.
• This unit does not have a design that is resistant to water pressure. Do
not put the unit in the water or directly under the water gushing out of
the faucet to avoid a malfunction.
• Do not pour high-temperature water or blow hot air from a hair dryer
or any other appliance on the unit directly. Also never use the unit
in a place subject to high temperatures, such as in a sauna or near a
heat source.
CAUTION : Handle the cap with care. The cap plays a very
important role in maintenance of the water resistant performance.
When using the unit, make sure that the cap is closed completely. When
closing the cap, be careful not to allow foreign objects inside. If the cap
is not closed completely the water resistant performance may
deteriorate and may cause a malfunction of the unit as a result of water
entering the unit.
Passive radiator
Cap