Page 1
DT362DN/DT362DH INTRODUCTION Thank you for acquiring the DT362DN/DT362DH, part of DT Research’s line of Rugged Tablets. Featuring a slim yet robust enclosure, the DT362DN/DT362DH with 6” high brightness TFT display is powered by the Intel® Core® i3-N300 or Intel® N200 processor, offering optimal combinations of performance and power savings.
Page 2
To activate DT362DN/DT362DH, push and quickly release the Power Button. The product warranty. display will come on in a few seconds. To put the DT362DN/DT362DH in standby • Do not use any power adapter or charging cradle other than the one provided with mode, push and quickly release the Power Button.
Page 3
Start Up Data Capture Module Operation Guide If your DT362DN/DT362DH comes with a RFID Reader refer to the steps below to If the power up (from Standby mode or otherwise) is successful, the appropriate configure the settings. interface will be displayed after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be established.
Page 4
Safety Instructions Federal Communication Commission Interference This equipment has been tested and found to comply with the limits for a For Battery Safety: Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are • Replace only with the same or equivalent type recommended by the manufac- designed to provide reasonable protection against harmful interference in turer.
Need help?
Do you have a question about the DT362DH and is the answer not in the manual?
Questions and answers