Rear Panel - TRENDnet TEG-448WS User Manual

Mini-GBIC Slots (sharing with port 45F~48F)
The Switch is equipped with four combo mini-GBIC ports, supported
optional 1000BASE-SX/LX mini-GBIC module.
The 1000BASE-T port 45, 46, 47 and 48 are the same ports with the
mini-GBIC port 45F, 46F, 47F and 48F, when plug in the mini-GBIC
module, the device will activate mini-GBIC, and the RJ45 port will be
disabled.
Reset:
The Reset button is to reset all the setting back to the factory default.
Note: Be sure that you recorded the setting of your device, else all
the setting will be erased when pressing the "Reset" button.

Rear Panel

The rear panel of the Switch consists of an AC power connector. The
following shows the rear panel of the Switch.
Figure 5. Rear panel
AC Power Connector:
This is a three-pronged connector that supports the power cord. Plug
in the female connector of the provided power cord into this
connector, and the male into a power outlet. Supported input voltages
range from 100-240V AC at 50-60Hz.
20