Sending A Call; Ending A Call; Receiving A Call; Displaying Your Phone Number - Motorola V70 User Manual

Sending a Call

To call a number, your phone:
• must be rotated completely open to expose the keypad
• must be turned on
• must have a SIM card inserted and unlocked
• must have a network connection with adequate signal strength
Press keypad keys to dial the phone number (up to 32 digits)
1
Tip: If you make a mistake, press
press and hold
DELETE
Press (send key) to send the call.
2
You can make an emergency call even when the phone is locked, or when a
A
SIM card is not inserted. See "Dialling an Emergency Number".

Ending a Call

Press (end key) to end the call.

Receiving a Call

To receive a call, your phone:
•
must be rotated completely open to expose the keypad or have a headset (an
optional accessory) plugged in
•
must be turned on
•
must have a SIM card inserted and unlocked
•
must have a network connection with adequate signal strength
If your phone is locked, you must unlock it to answer the call.
Your phone cannot receive calls when your SIM card is locked.
A
When you receive a call, your phone rings and/or vibrates and displays an
incoming call message.
Press or ANSWER (

Displaying Your Phone Number

From the idle display:
Press to see your phone number.
Your phone number must be programmed on your SIM card in order to use
A
this feature.
DELETE ( ) to delete the last digit, or
( ) to clear all digits.
) to answer the call.
Getting Started 17