Table of Contents
Advertisement
Browser Setup
To log on to the mobile Internet you need to subscribe to WAP services available
from your service provider and make sure that your access settings are correct.
Proxy Setting
Your phone comes with 3 WAP profiles in order to simplify your browsing. To set
WAP profiles, select one of the profiles (1-3). You can then set the two other
profiles in the same way.
Profile 1
Press
(SEL) or
, and the following options will appear:
•
Activate
Set Profile 1 as default.
•
Data Info
Enter the following account information provided by your Internet Service
Provider (ISP).
−
Phone #
This is the number that your phone will dial to access the Internet. Your ISP
provides this number.
−
User
This is your user ID, provided by your ISP.
−
Password
Enter the password provided by your ISP.
Then set Baud Rate (i.e. data transmission rate) and Line Type:
−
Baud Rate
The default setting is 9600, which is the standard data rate for GSM phones.
−
Line Type
This is the type of call you make to your ISP. The default setting is ISDN.
•
Primary Data
This is the IP address of the gateway (ISP main server) through which you
access the Internet. Enter the IP provided by your service provider.
•
Secondary
Enter the backup IP if available. The backup IP will be used if the main server
does not respond during dial-up.
The Menus 69
Advertisement
Table of Contents
