Table of Contents
Advertisement
Ending a call
When you finish a phone call, press
mode. Press
or
(EXIT) if you want to drop a call.
Answering a call
When your phone rings or vibrates, the screen will display the name or the phone
number of the caller
The name displayed depends on the data in the Phone
Book. Press
to answer a call. You can also answer incoming calls by pressing
any key.
To change the answering mode, you must go to Profiles under the Audio
Setting menu.
Switching off the phone
Long press
to switch your phone off.
One-touch dialling
There are two ways of doing one-touch dialling while in standby mode:
•
Long press
. The last number you dialled will be dialled again automatically.
•
You can dial any of the first 9 phone numbers saved in the Phone Book by
long pressing its phone book location number. If the number is saved in the
Phone Book at location 5, for example, long press
Making a voice dial call
A
You must add a voice tag to a phone book record and activate the Voice Dial
feature before you can make a voice dial call. For how to add a voice tag, see
Phone Book: The Menus. You can activate the Voice Dial feature in Voice
Dial under the Phone Setting menu.
1
In standby, long press
2
After the tone use the microphone to say the voice tag of a desired phone
number.
3
When your phone recognises this voice tag, the number's phone book record
and Call? will appear on the screen asking for your confirmation. Press
(OK) or
to make the call. You can also wait a few seconds and your phone
will dial the number automatically.
26 Using Your Phone
to end the call and return to standby
.
to make the call.
Advertisement
Table of Contents
