URBAN OUTFITTERS RYAN NESTING SIDE TABLE Assembly Instructions

RYAN NESTING SIDE TABLE
Assembly Instructions
TOOLS REQUIRED BUT NOT INCLUDED: N/A
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place overheat or air conditioning vents. Adjust
levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED
(A) Large Metal Frame Leg
X4
(E) Bolts [M6 x 10mm]
X16
(I) Hex Key
X1
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
(B) Large Metal Sheet
X1
(F) Locking Casters
x18
(C) Small Metal Frame Leg
X4
(G) Flat Washer
X8
(D) Small Metal Sheet
X1
(H) Open Wrench
X1
Page 1 of 3