Image Is Blurred Or Out Of Focus - Canon IXUS 90 IS User Manual

184

Image is blurred or out of focus.

The camera moves when
the shutter button is
pressed.
AF-assist Beam is set to
[Off].
Subject is out of focal
range.
The subject is hard to focus
on.
Subject in recorded image is too dark.
Insufficient light for
shooting.
The subject is
underexposed because the
surroundings are too bright.
Subject is too far away for
flash to reach.
Confirm the procedures in
" appears" (p.
In dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to activate
it (p. 53). Take care not to obstruct
the AF-assist Beam with your hand
when used.
Shoot with the subject at the correct
focusing range (p.
The camera may be set to an
unintended function (such as Macro).
Cancel the setting.
Use the focus lock or AF lock to
shoot (p. 94).
Set the flash to
Set the exposure compensation to a
positive (+) setting
Use the AE Lock or spot metering
functions (pp. 95, 98).
Shoot with the subject within the
correct flash range when using the
built-in flash (p. 207).
Raise the ISO speed and then shoot
(p. 71).
182).
206).
(Flash on) (p.
(p. 97).
64).