Selecting The Face To Focus On (Face Select And Track) - Canon IXUS 90 IS User Manual

92
Selecting the Face to Focus On
(Face Select and Track)
Once the focus is fixed to a subject's face, the frame can be set to
follow the subject within a certain range.
To use the Face Select and Track function, first configure the
following settings.
- Set the AF frame to [Face Detect]
- Register the
button
1
Select a face you wish to focus on.
1. When a face is detected, press the
button.
• The Face Select mode will activate
and a green face frame (
display around the main subject.
Even if the subject moves, the frame
will follow the subject within a certain
range.
2. Select the person you wish to focus
on.
• When several faces have been
detected, press the
or turn the control dial to move the
face frame to another subject.
• The face frame will not display when
a face is not detected.
• Holding down the DISP. button will
display face frames (up to 35) of all
the detected faces (green: face of
main subject, white: detected faces).
• Pressing the
(Face Select and Track) function to the
(p. 112).
or
button cancels the Face Select mode.
Available Shooting Modes
(p. 89).
) will
Face Frame
button
p. 220
Face Frame