Table of Contents
Advertisement
Memory card is not
formatted correctly.
SD memory card or SDHC
memory card is write
protected.
Image is blurred or out of focus.
The camera moves when
the shutter button is
pressed.
AF-assist Beam is set to
[Off].
Subject is out of focal
range.
The subject is hard to
focus on.
Subject in recorded image is too dark.
Insufficient light for
shooting.
The subject is
underexposed because
the surroundings are too
bright.
Format the memory card
223).
If reformatting does not work, the
memory card logic circuits may be
damaged. Consult the nearest Canon
Customer Support Help Desk.
Slide the write protect tab upward
(p.
259).
Confirm the procedures in
"
appears"
(p.
In dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to activate
it
(p.
55). Take care not to obstruct the
AF-assist Beam with your hand when
used.
Shoot with the subject at the correct
focusing distance
The camera may be set to an
unintended function (such as macro or
manual focus). Cancel the setting.
Use the focus lock, AF lock or manual
focus to shoot
(p.
Raise the built-in flash to
on)
(p.
72).
Use a high-output externally mounted
flash.
Set the exposure compensation to a
positive (+) setting
Use the AE lock or spot metering
functions
(p.
139).
(pp.
16,
239).
(p.
282).
127).
(Flash
(p.
136).
241
Advertisement
Table of Contents
