Switching between Focusing Modes
The autofocus frame (AF frame) indicates the area used to set the
focus. Select from among the following three focusing methods.
(No frame)
1
(Rec.) Menu
[Face Detect]*/[On]/[Off].
*Default setting.
[Face Detect] cannot be used when the LCD monitor is
turned off.
The AF frame appears as follows when the shutter button is
pressed halfway.
- Green:
- Yellow:
- No Display: Focusing difficulty (AiAF set to [On])
46
You can have the camera automatically detect
the position of a face and use this data to set the
focus and exposure* while shooting. In addition,
Face
the camera will meter the subject so that the face
is correctly illuminated when the flash fires. If a
Detect
face is not detected, shooting will take place with
[On].
*Only in evaluative metering mode
The camera detects the subject and highlights
On
the AF frames, from 9 available points, that it will
use to determine the focus.
The camera focuses using the center AF frame.
Off
This is convenient for focusing on a specific part
of a subject with greater certainty.
See Menus and Settings
Shooting preparations complete
Focusing difficulty (AiAF set to [Off])
[AiAF]
(p.
23).
(p.
51).