Canon EOS 10D Instruction Manual page 33

About trimmed images
The trimmed range can be reverted to its original condition at
any time
A trimmed image is displayed or printed as a trimmed image.
However, since the image is not actually trimmed, you can always
revert to the original image by clicking the [Reset] button in the
trimming window or performing the "Re-Editing an Image" procedure
(p.35).
Display of the trimmed image in each window
• Main window: The frame showing the trimming range is
displayed on the image, and the [
displayed (p.88).
• Edit window: The image is displayed in its trimmed condition.
• Edit image window: The thumbnail image is the same as the main
window display, and the enlarged image is the
same as the edit window display.
Printing a trimmed image
You can print as a trimmed image by printing it in DPP.
The image becomes a trimmed image when converted and saved
The trimmed RAW image actually becomes a trimmed image when
converted to a JPEG or TIFF image and saved (p.34).
Images that have aspect ratio set display as trimmed images
When aspect ratio information is attached to the shot image with a
camera where you can set the aspect ratio, the trimming range is
displayed based on the aspect ratio information. However, since the
image is not actually trimmed, you can change the trimming range or
revert to the condition before trimming.
Convenient functions of the trimming window
Switch between screens using the keyboard
You can also switch between full screen display/normal screen
display by pressing the <Alt> + <Enter> keys or the <F11> key.
Operate using the menu
Each operation can also be performed with the menu which appears
when you right-click with the mouse on the image.
Apply the trimmed range to another image
You can apply the trimmed range to another image by clicking the
[Copy] button to copy the trimmed range, displaying another image
] mark is
and then clicking the [Paste] button.
To batch apply a copied trimming range to multiple images, select the
trimmed image and the multiple images to which you want to apply
the trimmed range in the main window, and display the trimming
window. With the trimmed image displayed, click the [Copy] button
and then click the [Apply All] button. This will apply the trimming range
to all the images selected when the trimming window is displayed.
For a list of the trimming window functions, refer to p.95.
Introduction
Contents at
a Glance
1
Basic
Operation
2
Advanced
Operation
Advanced
3
Image Editing
and Printing
Processing
4
Large Numbers
of Images
5
Editing JPEG
Images
Reference
Index
32