Adjusting Color Tone Using Click White Balance - Canon EOS 10D Instruction Manual

Adjusting Color Tone Using Click White Balance

You can adjust white balance using a selected part of an image as the
standard for white to make the image appear natural. Using click white
balance is effective when using it in parts of an image where white color
tone has changed under the influence of a light source.
Click the [ ] button.
1
Click on a point that is to be the standard for white.
2
The coordinates of the cursor position and
the RGB values (8-bit conversion)
The color of the image is adjusted with the point you selected as
the standard for white.
If you click on another point in the image, the white balance is
adjusted again.
To finish click white balance, right-click with the mouse or click
the [ ] button again.
When there are no white areas in your image
When there are no white areas in your image, you can adjust the white
balance by clicking on a neutral grey point of the image in step 2. This
has the same adjustment result as selecting a white point.
The image is adjusted based on the average value of 1 × 1 pixel
range from the clicked point.
The histogram display changes according to adjustment. You can
also fix the histogram display to the display before any
adjustments (p.58).
Introduction
Contents at
a Glance
1
Basic
Operation
2
Advanced
Operation
Advanced
3
Image Editing
and Printing
Processing
4
Large Numbers
of Images
5
Editing JPEG
Images
Reference
Index
72