1. Manuals
  2. Brands
  3. DMP Manuals
  4. Transmitter
  5. 1102 Series
  6. Installation manual

DMP 1102 Series Installation Manual

Wireless universal transmitter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLATION GUIDE
1102 Series
Wireless Universal Transmitter

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1102 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for DMP 1102 Series

Summary of Contents for DMP 1102 Series

  • Page 1 INSTALLATION GUIDE 1102 Series Wireless Universal Transmitter...

  • Page 2: Get Started

    Compatibility ▶ All DMP 1100 Series Wireless Receivers ▶ All DMP XT Series and XR Series panels Note: To enable encryption, Version 183 is required for XT and XR Series panels and Version 300 is required for Wireless Receivers. Procedure To install an 1102, this guide walks you through these required steps: Program the panel.

  • Page 3: Installation

    13. To save panel programming, go to STOP and press CMD. Install the Battery Use a 3.0 V lithium battery, a DMP Model CR123A battery, or an equivalent model from Sony or Murata. For listed installations, use either an Energizer® 123 battery or a CR123A battery manufactured by Panasonic or Tekcell.

  • Page 4: Mount The Transmitter

    Snap the transmitter cover back onto the base. Wire External Contacts Refer to Zone Information in the appropriate panel programming guide for more information. DMP recommends using 18 or 22 AWG unshielded wire for contact connections. Do not use twisted pair or shielded wire.

  • Page 5: Additional Information

    ADDITIONAL INFORMATION Supervision Time When a receiver is installed, powered up, or the panel is reset, the supervision time for transmitters is reset. If the receiver has been powered down for more than one hour, wireless transmitters may take up to an additional hour to send a supervision message unless tripped, tampered, or powered up.

  • Page 6: Specifications

    SPECIFICATIONS Battery Life Expectancy 5 years (normal operation) Type 3.0 V lithium CR123A Frequency Range 905-924 MHz Dimensions Transmitter Case 3.3 L x 1.6 W x 0.9 H in. Transmitter Base 3.3 L x 1.6 W x 0.1 H in. Housing Material Flame retardant ABS CERTIFICATIONS ▶...

  • Page 7: Fcc Information

    I N T R U S I O N • F I R E • A C C E S S • N E T W O R K S manufactured in Springfield, MO 2500 North Partnership Boulevard using U.S. and global components. Springfield, Missouri 65803-8877 LT-0701 1.05 23471 800.641.4282 | DMP.com © 2023...

Table of Contents