Advertisement
Quick Links
Advertisement
Related Manuals for MSI PRO MP273QP E2
Summary of Contents for MSI PRO MP273QP E2
- Page 1 PRO Series LCD Monitor PRO MP273QP E2 (3PB6) PRO MP273QW E2 (3PB6) User Guide...
-
Page 2: Table Of Contents
Contents Getting Started ......................3 Package Contents ....................3 Installing the Monitor Stand ................... 4 Adjusting the Monitor ..................... 6 Monitor Overview ....................8 Connecting the Monitor to PC ................11 OSD Setup ........................12 OSD Keys ......................12 OSD Menus........................13 Professional ...................... -
Page 3: Getting Started
This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity. Package Contents Monitor PRO MP273QP E2 PRO MP273QW E2 Documentation Quick Start Guide Stand with Screw(s) -
Page 4: Installing The Monitor Stand
Installing the Monitor Stand PRO MP273QP E2 1. Leave the monitor in its protective packaging. Align the stand bracket to the monitor groove. 2. Tighten the stand bracket with screws. 3. Connect the base to the stand and tighten the base screw to secure the base. - Page 5 This monitor comes with an optional VESA plate, providing users with the flexibility ∙ to mount their mini PC if desired. 75mm 100mm PRO MP273QW E2 1. Leave the monitor in its protective packaging. Align and gently push the stand bracket towards the monitor groove until it locks in place.
-
Page 6: Adjusting The Monitor
Adjusting the Monitor This monitor is designed to maximize your viewing comfort with its adjustment capabilities. PRO MP273QP E2 -5° 20° 45° 45° 90° 90° 130mm... - Page 7 PRO MP273QW E2 -5° 20° ⚠ Important Avoid touching the display panel when adjusting the monitor. ∙ Please slightly tilt the monitor backwards before pivoting it. ∙...
-
Page 8: Monitor Overview
Monitor Overview PRO MP273QP E2... - Page 9 PRO MP273QW E2...
- Page 10 OSD Keys Power Button / Power LED Lit in white after the monitor is turned on. If no signal input, the LED will turn into orange. Lit in orange when the monitor is in Stand-by mode. HDMI™ Connector Supports HDMI™ CEC, 2560x1440@100Hz as specified in HDMI™ 2.0b. HDMI™...
-
Page 11: Connecting The Monitor To Pc
4. Connect the external power supply to the monitor power jack. (Figure B) 5. Plug the power cord into the electrical outlet. (Figure C) 6. Turn on the monitor. (Figure D) 7. Power on the computer and the monitor will auto detect the signal source. PRO MP273QP E2 PRO MP273QW E2... -
Page 12: Osd Setup
OSD Setup This chapter provides you with essential information on OSD Setup. ⚠ Important All information is subject to change without prior notice. OSD Keys The monitor comes with a set of OSD Keys that help to control the On-Screen Display (OSD) menu. -
Page 13: Osd Menus
OSD Menus ⚠ Important The following settings will be grayed out when HDR signals are received: ∙ MPRT ∙ Contrast ∙ HDCR ∙ Low Blue Light ∙ Brightness ∙ Color Temperature Professional 1st Level Menu 2nd/3rd Level Menu Description Mode ∙... - Page 14 1st Level Menu 2nd/3rd Level Menu Description MPRT ∙ MPRT is available when the refresh rate is over 85 Hz. ∙ Activating MPRT will affect: Affected Function Function Status » Brightness Unable to select » HDCR Set to OFF Refresh Rate Location Left Top ∙...
-
Page 15: Image
1st Level Menu 2nd/3rd Level Menu Description Screen Assistance None ∙ Users can adjust Screen Assistance in any mode. Screen Size Auto ∙ Users can adjust Screen Size in any mode, any resolution and any screen refresh rate. 16:9 Adaptive-Sync ∙... -
Page 16: Input Source
1st Level Menu 2nd/3rd Level Menu Description Low Blue Light ∙ Low Blue Light protects your eyes against blue light. When enabled, Low Blue Light adjusts the screen color temperature to a more yellow glow. ∙ When Pro Mode is set to Anti-Blue, it is mandatory to enable Low Blue Light. -
Page 17: Navi Key
Navi Key 1st Level Menu 2nd Level Menu Description Enter ∙ All Navi Key items can be adjusted via OSD Menus. Left Brightness Right Mode Alarm Clock Input Source Refresh Rate Info. On Screen Audio Volume Settings 1st Level Menu 2nd Level Menu Description Language... - Page 18 1st Level Menu 2nd Level Menu Description OSD Time Out 5~30s ∙ Users can adjust OSD Time Out in any mode. Power Button ∙ When set to OFF, users can press the power button to turn off the monitor. Standby ∙...
-
Page 19: Specifications
Specifications Monitor PRO MP273QP E2 PRO MP273QW E2 Size 27 inch Curvature Flat Panel Type Resolution 2560x1440 (WQHD) Aspect Ratio 16:9 Brightness ∙ Typical SDR: 400 nits ∙ Peak HDR: 400 nits Contrast Ratio 1300:1 Refresh Rate 100Hz Response Time ∙... - Page 20 Monitor PRO MP273QP E2 PRO MP273QW E2 Adjustment (Tilt) -5° ~ 20° Adjustment (Height) 0 ~ 130mm Adjustment (Swivel) -45° ~ 45° Adjustment (Pivot) -90° ~ 90° Kensington Lock VESA Mounting ∙ Plate Type: 75 x 75 mm ∙ Screw Type: M4 x 10 mm •...
-
Page 21: Preset Display Modes
Preset Display Modes ⚠ Important All information is subject to change without prior notice. PRO MP273QP E2 PRO MP273QW E2 Standard Resolution HDMI™/DP HDMI™/DP 640x480 @60Hz @67Hz @72Hz @75Hz Dos-Mode 720x480 @60Hz 720x576 @50Hz SVGA 800x600 @56Hz @60Hz @72Hz @75Hz... -
Page 22: Troubleshooting
Troubleshooting The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer graphics card is properly installed. • Check if the computer and monitor are connected to electrical outlets and are turned on. -
Page 23: Safety Instructions
∙ Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord. ∙ If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device. - Page 24 ∙ If any of the following situations arises, get the device checked by service personnel: • The power cord or plug is damaged. • Liquid has penetrated into the device. • The device has been exposed to moisture. • The device does not work well or you can not get it working according to the User Guide.
-
Page 25: Tüv Rheinland Certification
TÜV Rheinland Certification TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light. -
Page 26: Regulatory Notices
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA (626) 913-0828 www.msi.com... -
Page 27: Weee Statement
Vietnam RoHS As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products. -
Page 28: Environmental Policy
Copyright and Trademarks Notice Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners.
Need help?
Do you have a question about the PRO MP273QP E2 and is the answer not in the manual?
Questions and answers