Connecting Your Callaway Upro - Callaway Golf uPro User Manual

Note: There are times when the uPro's red LED will not flash when charging is complete. If this red
LED is on (indicating charging) and has been on for several hours, then the charging is
complete. This can be confirmed by removing the USB cable then the battery and then
reinserting the battery and then the USB cable. The red LED should then flash if fully charged.

1.4 Connecting your Callaway uPro

In order to use your uPro on the course, you will need to register the uPro online. To begin the registration
process you will need to connect your uPro and launch the sync program. Below are instructions on
connecting your uPro and launching the sync program.
STEP 1: Power on the uPro
Press and hold the power button for 3 seconds to power on the uPro.
STEP 2: Connect to a computer
Once the Main Menu is displayed on the uPro (figure 3), connect the USB cable to the uPro. Insert the
mini-USB connector (smaller connector on the cable) into the USB connector on the uPro. Insert the other
end of the USB cable into an available USB port on the computer.
uPro User Guide (v1.4)
Figure 3: Main Menu
©2009 Callaway Golf Company Page 7 of 45