Callaway Golf uPro Quick Start Manual

Charging your Callaway uPro
Press Down
& Slide Open
1)
Remove the battery cover on the uPro. While pressing
the upper center portion of the battery cover firmly, slide
the battery cover downward to remove.
2)
Insert the Li-Ion rechargeable battery into the battery
compartment. Angle the battery such that the bottom
edge with the three contacts makes contact with the
connector on the uPro first and then push the top side
of the battery into place. The text on the battery should
Handle your Li-Ion battery with care.
be facing up.
See battery warning sheet for additional information.
3)
Replace the battery cover.
4)
Insert the mini-USB connector of the included USB cable
into the USB connector on the bottom of the uPro.
5) Connect the other end of the USB cable to the included
wall adapter.
6)
Plug the wall charger into an AC wall outlet. The uPro's
red LED will be lit while charging. If the red LED is not lit,
check your connections, and if the problem persists, please
reference the full User Manual at
uprogps. The red LED will begin to flash when charging
is completed. Charging the battery completely takes
approximately 3 hours.

Quick Start Guide

®
Battery Cover
Headphone Jack USB Port
www.callawaygolf.com/
Buttons
Microphone
LED Light
Voice
Recognition
Left LCD
Select
Power/Menu
Headphone USB
Powering On
Once you have charged your uPro, disconnect it from
the USB cable and power it on by pressing
the Power/Menu button for at least three seconds (until
the startup screen appears). The startup screen will show
four open dots which will fill-in as the startup progresses,
and then the Main Menu will be displayed.
Registering your Callaway uPro®
In order to use your uPro on the course, you will need
to register your uPro and create a user account online at
our website.
1) Power on the Callaway uPro –
button for 3 seconds to power on the uPro. Once the startup
screen appears, the uPro is powered on.
2) Connect to a computer –
played on the uPro, connect the USB cable to the uPro. Insert
the mini-USB connector (smaller connector on the cable)
ProMode
Button
Right LCD
Select
Directional
Arrows
Select/Enter
and holding
Press and hold the power
Once the Main Menu is dis-