Scan To File - Brother DCP-J125 User Manual

Network Scanning (For models with built-in network support)

Scan to File

When you choose Scan to File, you can scan a black and white or color document and send it directly to a
computer you designate on your network. The file will be saved in the folder and file format that you have
configured in ControlCenter.
a
Load your document.
b
Press (SCAN).
c
Press a or b to choose Scan to File.
Press OK.
d
Press a or b to choose the destination computer you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer
on the control panel.
Press OK.
Note
For DCP models, press a, b, d or c to select the first digit of the PIN number. Press OK to move the cursor,
then use a, b, d or c to select the second digit. Repeat until you have entered all four digits of the PIN
number.
e
Press Black Start or Color Start.
The machine starts the scanning process.
Note
• Scan type depends on the settings of the Device Button tab, Black Start or Color Start do not change
the settings.
• If you want to change between color and black and white scanning, choose color or black and white in the
scan type option on the Device Button tab of the ControlCenter configuration screen. (For Windows
SCAN on page 58. For Macintosh, see SCAN on page 156.)
• If you would like to change the file name of scanned documents, enter the file name in the File Name
section on the Device Button tab of the ControlCenter configuration.
13
®
, see
13
197