Remote Setup & Photocapture Center; Remote Setup (Not Available For Dcp Models, Mfc-J220, Mfc-J265W, Mfc-J270W, Mfc-J410W And Mfc-J415W) - Brother DCP-J125 User Manual

11
Remote Setup & PhotoCapture Center
Remote Setup
(Not available for DCP models, MFC-J220, MFC-J265W,
MFC-J270W, MFC-J410W and MFC-J415W)
The Remote Setup application lets you configure many machine settings from a Macintosh application.
When you access this application, the settings on your machine will be downloaded automatically to your
Macintosh and displayed on your Macintosh screen. If you change the settings, you can upload them directly
to the machine.
Note
The RemoteSetup application icon is in Macintosh HD/Library/Printers/Brother/Utilities.
 OK
Lets you start uploading data to the machine and exit the Remote Setup application. If an error message
is displayed, enter the correct data again and then click OK.
 Cancel
Lets you exit the Remote Setup application without uploading data to the machine.
Apply

Lets you upload data to the machine without exiting the Remote Setup application.
 Print
Lets you print the chosen items on the machine. You cannot print the data until it is uploaded to the
machine. Click Apply to upload the new data to the machine and then click Print.
 Export
Lets you save the current configuration setting to a file.
®
11
11
11
173