Power Supply; Hardware Specifications - Cisco Provider Connectivity Assurance Module Dock Hardware Installation Manual

Power Supply

1
3
Power Supply
The following table lists the specifications for each power supply used in the Module Dock.
Table 2: Power Specifications
Description
Input power ratings
Output power ratings
Power consumption

Hardware Specifications

The following table contains hardware specifications for the Module Dock.
Dimensions (H x W x D)
Weight
Temperature
Humidity
Altitude
Cisco Provider Connectivity Assurance Module Dock Hardware Installation Guide
4
Power LED
• Off—Device is unpowered
• Green—Device is powered and ready
• Orange—Device is powered but not ready
RJ-45 LED
• Off—Interface is inactive
• Green—Interface is active
1.15 x 2.3 x 5.4 in. (3 x 5.8 x 13.7 cm)
0.25 lb (0.115 kg)
Operating: 32 to 104°F (0 to 40°C)
Nonoperating: -40 to 158°F (-40 to 70°C)
Operating: 5 to 85 % RH, noncondensing
Nonoperating: 5 to 95 % RH, noncondensing
6562 ft (2000 m), above sea level
2 SFP LED
• Off—Interface is inactive
• Green—Interface is active
—
Specification
USB: 5 V DC, 900 mA
Max
SFP: 2.25 W
Max
4.5 W (15.3 BTU/hr )
Max Max
Overview