Safety Recommendations; Maintain Safety With Electricity; Prevent Esd Damage - Cisco Provider Connectivity Assurance Module Dock Hardware Installation Manual

Provider connectivity assurance module dock hardware
Table of Contents

Advertisement

Installation Preparation
Warning

Safety Recommendations

Observe these safety guidelines:
• Keep the area clear and dust free before, during, and after installation.
• Keep tools away from walkways, where you and others might trip over them.
• Do not wear loose clothing or jewelry, such as earrings, bracelets, or chains that could get caught in the
• Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.
• Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
• Never attempt to lift an object that is too heavy for one person.

Maintain Safety with Electricity

Warning
Read the
Follow these guidelines when working on equipment powered by electricity:
• Before beginning procedures that require access to the interior of the chassis, locate the emergency
• Do not work alone if potentially hazardous conditions exist anywhere in your work space.
• Never assume that power is disconnected; always check.
• Look carefully for possible hazards in your work area, such as moist floors, ungrounded power extension
• Use the chassis within its marked electrical ratings and product usage instructions.

Prevent ESD Damage

ESD occurs when electronic components are improperly handled, and it can damage equipment and impair
electrical circuitry, which can result in intermittent or complete failure of your equipment.
Statement 9001 Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
chassis.
Before working on a chassis, be sure the power cord is unplugged.
Regulatory Compliance and Safety Information
power-off switch for the room in which you are working. Then, if an electrical accident occurs, you can
act quickly to turn off the power.
cables, frayed power cords, and missing safety grounds.
Cisco Provider Connectivity Assurance Module Dock Hardware Installation Guide
Safety Recommendations
document before installing the chassis.
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Provider Connectivity Assurance Module Dock and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Skylight

Table of Contents