Charge Introduction Thank you for purchasing ePropulsion E Battery External Controller. This Controller is specially designed for E Battery and E Battery Solar Charger. ON/OFF Mode Switch Interface description Charge Charge RUN 1 Control ON/OFF Mode Switch Charge Charge RUN 1 5.50...
Page 5
For different E battery connections, you will need to purchase the following additional materials: Connection Item Note Battery Remote Switch 5m EB-AC02-01 To connect the remote switch, you need to Battery Comm Cable T EB-AC05-00 prepare Connector It is needed to connect Remote Switch Extension the remote switch, Cable...
LED Indicator RUN 1 基 底PC片 ,背部丝印黑,文字+方框部 分 丝印 白 , 白色 方 框 Indicating Item Description method 防 水 黑 色泡棉胶, 白色方 框区域背胶 镂 空 。 The steady light is for the controller to work, the flash light is for the battery communication lost Turn on the system using the power button on the No Control battery or the remote switch.
Faults resulting from any improper operation that contradicts the user manual. Accessories supplied with the product. Damage caused by accident, misuse or unauthorized repair. Damage caused by dropping, improper care or storage. If warranty expires, users can still enjoy maintenance services from ePropulsion authorized dealers with minimum maintenance charge.
WARRANTY CARD (*In order to validate warranty, please fill in this form first and read the Warranty Policies.) OWNER INFO. Owner Name Address Phone Email DEALER INFO. Store Name Address Phone Email PRODUCT INFO. Date of Purchase (mm/dd/yyyy) Serial No.
Page 12
Thanks for reading this user manual. If you have any concerns or find any problems while reading, please don't hesitate to contact us. We are delighted to offer service for you Guangdong ePropulsion Technology Limited Webseite: www.epropulsion.com E-Mail: service@epropulsion.com...
Need help?
Do you have a question about the BEC4850 and is the answer not in the manual?
Questions and answers