These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: SKR2 / SKR9 SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician • Please isolate mains prior to installation or maintenance •...
Page 4
Fig. 1 • Feed the mains cable into the unit and secure the base to the surface Connect to the mains supply ensuring the correct polarity is observed (see Fig. 2) L – Live (brown), E – • Earth (green/yellow) and N – Neutral (blue) Fig.
Page 5
WARNING This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed. WARNING This unit should NOT be subject to any insulation resistance testing, failure to follow this instruction could cause damage to the USB circuit and void the warranty USB or Bluetooth products, dimmers, shaver sockets and products with LED or neon...
Need help?
Do you have a question about the SKR2 and is the answer not in the manual?
Questions and answers