Advertisement
Quick Links
Technical Support and E-Warranty Certificate www.vevor.com/support
MOTORCYCLE STAND
OWNER'S MANUAL
MODEL: TD-003-05FR
We continue to be committed to provide you tools with competitive price. "Save
Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared
to the major top brands and doses not necessarily mean to cover all categories of
tools offered by us. You are kindly reminded to verify carefully when you are
placing an order with us if you are actually saving half in comparison with the top
major brands.
Advertisement
Related Manuals for VEVOR TD-003-05FR
Summary of Contents for VEVOR TD-003-05FR
- Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support MOTORCYCLE STAND OWNER’S MANUAL MODEL: TD-003-05FR We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
- Page 2 CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
-
Page 3: Safety And Warning
Always keep this stand away from children. Check the stand is in good condition before using it. Specifications Model Series TD-003-05FR Maximum Load Capacity (lb) Height (inch) 13.8 560×480×130 MEAS(mm) Gross Weight (kg) - 2 -... - Page 4 Accessories Of Front Stand Figure 1 Description Main frame Frame for wheels Front adaptor with spring M8 Screw, washer and lock-nut set Black wheel M10 Screw, washer and lock-nut set R pin Clamping piece Assembling Instructions of the Front Stand A.
- Page 5 B. Place M8 screws through the holes of clamping pieces and the frame, and make sure that the connecting part are covered with clamping pieces on both sides. Then add washers and use tools to tighten with the lock-nuts. C. Insert adaptors on the top of the both frames with wheels, then locked with the R pins.
- Page 6 Description Main frame Frame for wheels M8 screw, washer and lock-nut set Black wheel M10 screw, washer and lock-nut set Screw with plastic topper Clamping piece Fork adaptor Paddle adaptor Assembling Instructions of the Rear Stand A. Assemble the wheels on both sides of the frame and then Insert both pieces of frames.
- Page 7 D. Rise the stand with handle and move the stand to where are under the swing arm, then press down the stand in order to rise your motorcycle rear wheel. Make sure the paddle adaptors are snug up against the swing arm. Operation of the Rear Stand with Fork Adaptors A.
- Page 8 Technical Support and E-Warranty Certificate www.vevor.com/support Made In China...
Need help?
Do you have a question about the TD-003-05FR and is the answer not in the manual?
Questions and answers