Connecting To A Power Source - Blue Robotics T200 Manual

Connect these three thruster wires to the three motor phase wires from the
ESC. How you connect the wires is up to your preference. The wires can be
soldered together or you can use connectors like bullet connectors or screw
terminal blocks. The order does not matter, the thruster will spin with the wires
connected in any configuration. If the thruster is spinning in reverse of what is
desired, swap the connection of two of the wires.

2. Connecting to a Power Source

After the thruster is connected to the ESC, connect the red (positive) and black
(ground) ESC power wires to a power source. The power source voltage