Text Entry - Motorola MOTORAZR V3IM Manual

text entry

Some features let you enter text.
450
56 basics
• To enter numbers quickly, press and
hold a number key to temporarily
switch to numeric mode. Press the
number keys to enter the numbers you
want. Enter a space to change back to
iTAP mode.
• Press 1 to enter punctuation or other
characters.
tap mode
Press # in a text entry screen to switch to
tap mode. If you don't see g or m, press
M > Entry Setup to set tap mode as your
primary or secondary text entry mode.
To enter text in tap mode, press a keypad key
repeatedly to cycle through the letters and
number on the key. Repeat this step to enter
each letter.
58 basics
Press # in a text entry screen to select an
entry mode:
entry modes
j or g
Your Primary text entry mode can
be set to any iTAP ® j or tap g
mode.
p or m
Your Secondary text entry mode
can be set to any iTAP p or tap
m mode, or set to None if you
don't want a secondary entry
mode.
W Numeric mode enters numbers
only.
[
Symbol mode enters symbols
only.
To set your primary and secondary text entry
modes, press M > Entry Setup in a text
entry screen and select Primary Setup or
Secondary Setup.
For example, if you press 7 one time, your
display shows:
Tip: WANT TO SHOUT YOUR MESSAGE?
Press 0 in a text entry screen to change text
case to no capital letters (U), next letter
capital (V with k, n, h, or q), or all
capitals (T with i, o, f, or l).
®
iTAP mode
Press # in a text entry screen to switch to
iTAP mode. If you don't see j or p, press
M > Entry Setup to set iTAP mode as your
primary or secondary text entry mode.
iTAP mode lets you enter words using one
keypress per letter. The iTAP software
combines your keypresses into common
words, and predicts each word as you enter
it.
When you enter three or more characters in a
row, your phone may guess the rest of the
word. For example, if you enter Prog your
display might show:
449
• The first character of every sentence is
capitalised. If necessary, press S
down to change the character to
lowercase before the cursor moves to
the next position.
• Press S to move the flashing cursor
to enter or edit message text.
For example, if you press 7 7 6 4,
your display shows:
440
• If you want a different word (such as
Progress), continue pressing keypad
keys to enter the remaining characters.
basics 57
• If you don't want to save your text or
text edits, press O to exit without
saving.
• Tap extended mode cycles through
additional special characters and
symbols as you repeatedly press a
keypad key.
numeric mode
Press # in a text entry screen until you see
W. Press the number keys to enter the
numbers you want.
symbol mode
Press # in a text entry screen until you see
[. Press a keypad key to show its symbols at
the bottom of the display. Scroll to the symbol
you want, then press the centre
select key s.
basics 59