Settings - Electrolux EW2F3048E2 User Manual

Touch Time manager
reduce the programme duration according to
your needs. The display shows the new
programme duration and a number of dashes
will decrease accordingly:
suitable for a full load of normally soiled
garments.
a quick cycle for a full load of lightly
soiled garments.
very quick cycle for a smaller lightly
soiled load (max. half load recommended).
the shortest cycle to freshen up a small
amount of laundry.
The Time manager is available only with the
programmes in the table.

10. SETTINGS

10.1 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option, press
and at the same time until the
indicator comes on/goes off.
You can activate this option:
• After you press
programme knob are locked.
• Before you press
cannot start.
10.2 Permanent Extra Rinse
With this option you can permanently have an
extra rinse when you set a new programme.
• To activate/deactivate this option press
and at the same time until the
indicator comes on/goes off.
10.3 Acoustic signals
The acoustic signals operate when:
• The programme is completed.
• The appliance has a malfunction.
18 ENGLISH
button to
: the options and the
: the appliance
■
1)
■
1)
Defaullt duration for all programmes.
To deactivate/activate the acoustic signals,
press and
seconds.
If you deactivate the acoustic signals,
they continue operate when the
appliance has a malfunction.
10.4 Operating Hours Counter
It is possible to visualise the total operating
time of the appliance in hours, starting from
the first switching on. This value will count
operating time of the cycles (does not include
pauses, delayed start time). To visualise this
value, proceed as follows:
1. Switch the appliance on by turning the
programme knob to the Eco 40-60
programme (1st position clockwise).
2. Press and hold the
for some seconds (within 10 seconds
after the switching on. After these 10
seconds, the key combination activates
and deactivates the acoustic signals).
3. After 3 seconds the total hours operated
by the appliance are shown in the display:
e.g. 1276 hours, the display shows the
text Hr for 2 seconds, 12 (thousands and
■ ■
■ ■
■ ■
■ ■
at the same time for 3
and buttons
■
■
■
■