Hardware Installation - OWC RTIST76104SS2P User Manual

1.3

Hardware Installation

After verifying that the product body and related accessories are not missing or damaged, please follow
the following procedures to complete the hardware assembly
Step 1 Open the outer package and take out the product body. (Make sure the related accessories
and the product body are not damaged or missing. If you have any questions, contact the
distributor or sales)
Step 2 Mount the product to the rack. Make sure that the ventilation fan is not obstructed and
appropriate ventilation space is provided around the product. (Do not place the product
nearby water area or any environment that may cause damage to the product)
Step 3 Take out the tray and install your hard disk in it. Make sure to fasten the hard disk securing
screws to prevent damages caused by unnecessary movement.
Step 4 Once the installation is completed, insert the tray back and fi x it fi rmly in the proper place.
E
N
G
L
I
S
H
Installation 5