Tty Operation - Motorola E815 User Manual

Action
1 Highlight a device in the list of devices your phone
found.
2 Press the SELECT key to connect the device.
3 If the device requests permission to bond with
your phone, select YES and enter the device PIN
code to create a secure connection with the
device.
Note: The default PIN code is 0000.
When the connection is made, the à (Bluetooth) indicator
or a Bluetooth message displays in the home screen.
Tip: For specific information about an accessory, refer to
the instructions that came with it.

TTY Operation

You can use an optional TTY device with your
phone to send and receive calls. You must plug
032380o
the TTY device into the phone's headset jack and
set the phone to operate in 1 of 3 TTY modes.
Note: Use a TSB-121 compliant cable (supplied by the TTY
manufacturer) to connect the TTY device to your phone.
Note: Set the phone to level 4 (middle setting) for proper
operation. If you experience a high number of incorrect
characters, adjust the volume as needed to minimize the error
rate.
Note: For optimal performance, your phone should be at least
12 inches (30 centimeters) from the TTY device. Placing the
phone too close to the TTY device may cause high error
rates.
31