Table of Contents
Advertisement
Alarm Setting (by remote control)
1. Press
to activate / inactivate alarm #1. You will see the icon
that means alarm #1 is activated, while disappears means alarm #1 is inactivated.
2. Press
to enter the alarm #1 setting, you will set in sequence for
Alarm Hour > Minute > Alarm Mode (MON-SUN, MON-FRI, SAT-SUN).
3. The "Hour" is flashing, press
4. Then "Minute" is flashing, press
5. Then select your alarm mode. There're 3 modes to choose from.
1-7 means alarm works for Monday to Sunday (every day).
1-5 means alarm only works for Monday to Friday.
6-7 means alarm only works for Saturday to Sunday.
Then press
6. You can press
Note: Please follow the same setting to set Alarm #2.
6
to finish alarm setting.
to adjust alarm volume from V01 to V05.
ThreeDucksDirect@outlook.com
to select value. Press
to select value. Press
appears,
and next.
and next.
Advertisement
Table of Contents
Need help?
Do you have a question about the PH03-RC and is the answer not in the manual?
Questions and answers
i have just bought your clock and the alarm does not ring i have followed the instruction 3 times and still nothing everything else is fine **** i doing something wrong
The alarm on the JALL PH03-RC clock may not be ringing because the alarm mode is set to 1-5 (Monday to Friday), meaning it will not go off on Saturday and Sunday. Check the alarm mode settings and adjust them if needed.
This answer is automatically generated