JALL K8 - Sunrise Alarm Clock Manual
  1. Manuals
  2. Brands
  3. JALL Manuals
  4. Alarm Clock
  5. K8
  6. User manual

JALL K8 - Sunrise Alarm Clock Manual

Also See for K8:

Advertisement

Table of Contents
Contents
JALL K8 - Sunrise Alarm Clock Manual

OVERVIEW

OVERVIEW - Part 1
OVERVIEW - Part 2

  1. Time Display Area
  2. Alarm 1 indicator
  3. Alarm 2 indicator
  4. Light Mode icon
  5. Music icon
  6. FM Radio icon
  7. Volume icon
  8. Snooze icon
  9. Fall Asleep icon
  10. Time Set icon
  11. Monday-Sunday
  12. AM / PM icon
  13. Time: Hour
  14. Time: Minute

OVERVIEW - Part 3

  1. Snooze Button
  2. Alarm 1 Button
  3. Alarm 2 Button
  4. Time Display Dimmer / Time Set
  5. Volume Up
  6. FM Radio Button
  7. Music Button
  8. Volume Down
  9. Fall Asleep Button
  10. Intensity Up
  11. Wake Up Light Button
  12. RGB Mood Light Button
  13. Intensity Down
  14. Alarm 1 Mode Switch (Every Day / Weekday / Weekend)
  15. Alarm 2 Mode Switch (Every Day / Weekday / Weekend)
  16. Battery Compartment (CR2032)
  17. USB Output Port - 5VIA
  18. DC Input Port - 5V2A
  19. Antenna

*The Fabric version has some differences on the back of the product.

FIRST USE


Please connect one end of the AC adapter to the DC input port of the wake-up light alarm clock, and plug the other end of the AC adapter into the AC 100-240V home socket. Place the alarm clock at a distance of 16-20 inches from your head, such as on a bedside table.

This alarm clock comes with a CR2032 battery pre-installed in the battery compartment. Please remove the insulation label on the back of the clock to enable the alarm clock to function properly. Although the alarm clock is equipped with a CR2032 battery, AC power supply must be required. The CR2032 battery is only used for backing up customer settings in case of power failure.

This clock comes with a lifetime warranty and I strongly recommend that you contact us with your order number to activate the warranty.

This sunrise alarm clock should be placed in a cool and dry place. Please wipe off the dust with a soft and damp cloth. Do not use liquid or abrasive cleaning agents.

TIME SET

Note: in the process of setting the time, you only use the Time Set and Snooze button.

  1. 12H/24H Time Format Setting
    Press and hold the Time Set button for 2 seconds to start the time setting. Now, the "12H" (24H) on the display area is flashing. Please rotate the Snooze button to select the "12H" or "24H" time format.
    Then click the Time Set button to confirm. And then the "Hour" icon is flashing.
  2. Time: "Hour" Setting
    Please rotate the Snooze button to select the 'Hour". Then click the Time Set button to confirm. And then the "Minute" icon is flashing.
  3. Time: "Minute" Setting
    Please rotate the Snooze button to select the "Minute' Then click the Time Set button to confirm. And then the "Mon-Sun" icon is flashing.
  4. "Monday-Sunday" Setting
    Please rotate the Snooze button to select which day of the week it is today. Then click the Time Set button to confirm.

So far, you have set the time for your alarm clock. If the device is disconnected from the power source and the insulation label is not removed, after the clock is reconnected to the power source, the time will be reset to 12:00 AM.

ALARM SET

Note: in the process of setting the alarm, you only use the Alarm and Snooze button. Below is an example of setting the alarm 1. The same applies to alarm 2.

  1. Activate The Alarm 1
    Click the Alarm 1 button to activate alarm 1 first. Now, the time display area will flash for 2 seconds to remind the user that the alarm 1 is activated.
  2. Alarm Time: "Hour" Setting
    Press and hold the Alarm 1 button for 2 seconds to start the alarm 1 setting Now, the "Hour" icon on the display area is flashing. Please rotate the Snooze button to set the alarm time: "Hour". Then click the Alarm 1 button to confirm. And then the "Minute" icon is flashing
  3. Alarm Time: "Minute" Setting
    Please rotate the Snooze button to set the alarm time. 'Minute". Then click the Alarm 1 button to confirm. And then the Alarm Sounds code(S01) is flashing.
  4. Alarm Sounds Setting
    Please rotate the Snooze button to set the alarm sounds S01-S08(or OFF). Then click the Alarm 1 button to confirm. And then the sounds volume is flashing.
  5. Sounds Volume Setting
    Please rotate the Snooze button to set the sounds volume (V01-V16). Then click the Alarm 1 button to confirm. And then the light brightness is flashing.
  6. Light Intensity Setting
    Please rotate the Snooze button to set the wake-up light intensity L01-L20(or OFF).Then click the Alarm 1 button to confirm. And then the Dawn Duration Time is flashing.
  7. Dawn Duration Time Setting
    Please rotate the Snooze button to set the Dawn Duration Time (0-60 Minutes) Then click the Alarm 1 button to confirm.

So far, you have set an alarm for your clock.
Note: You can't set the sounds and light to be "OFF" at the same time.

* The dawn duration is the time it takes for the light of the alarm clock to gradually brighten up in advance. During this period, the wake-up light will gradually brighten, when the alarm time comes, the light reaches the maximum brightness you set, and the alarm will sound at the same time.

  1. Alarm Mode Setting
    By turning the Alarm Mode Switch on the back of the alarm clock, you can set the corresponding alarm for Every Day, Weekday or Weekend.
    Alarm Mode Setting

*The Fabric version has some differences on the back of the product.

SNOOZE

When the alarm goes off, you can click the Snooze button to enter snooze mode.

  1. Snooze Function
    After clicking the Snooze button, you will sleep for an extra 9 minutes 9 minutes later, the light and sound will reappear. There're infinite times of snooze for this alarm clock.

SNOOZE SET

In this mode, you can have the following settings:

  1. Set the snooze duration. (Default 9 minutes)
  2. When the alarm rings, you can choose whether the light stays on after pressing the snooze button. (Default off)
  1. Set the Snooze Duration
    Press and hold the Snooze button for 3 seconds to open snooze mode. Please rotate the Snooze button to set the snooze duration (5-20 mins). Click the Snooze button to confirm.
  2. Set The Light On / Off During Snooze
    Please rotate the Snooze button to choose whether the light stays on after pressing the snooze button. Click the Snooze button to confirm.

STOP ALARMS

When the alarm goes off, you have 3 options to stop the alarm.

  1. Click the Corresponding Alarm Button Once
  2. Press and Hold the Snooze Button for 3 Seconds
  3. Without Any Action
    If there is no operation within 20 minutes, the alarm will automatically turn off for the day.

How To Disable The Alarm Completely?
When you set the alarm 1, the alarm 1 indicator will appear on the display panel, which means that the alarm 1 is currently active and it will ring the next time. If you want to disable alarm 1 completely, you need to click the Alarm 1 button, and the alarm 1 indicator will disappear, which means you have completely turned off the alarm 1 and it will not ring the next time. Similarly, if you want to reactivate it, please click the Alarm 1 button again.

FM RADIO SET

In order to get excellent FM radio performance, we recommend that the antenna should be fully extended. When the radio is in operation, adjust the antenna position to get the best reception.

Manual Frequency Tuning

  1. Turn The FM Radio On
    Click the FM Radio button to turn FM Radio on Now, the time display area will show the frequency of current station to remind the user that the FM Radio is activated.
  2. Manual Frequency Tuning
    Please rotate the Snooze button to manually search for all available stations within the frequency range of 76.0 MHZ to 108.0 MHZ.
  3. Volume Up / Down
    Click the Volume Up (or Volume Down) button to increase or decrease the volume.
  4. Turn Off The FM Radio
    Click the FM Radio button again to quit.

Automatic Frequency Tuning

  1. Turn The FM Radio On
    Click the FM Radio button to turn FM Radio on Now, the time display area will show the frequency of current station to remind the user that the FM Radio is activated.
  2. Automatic Frequency Tuning
    Press and hold the FM Radio button for 2 seconds and the device will scan for all available stations from 76.0 MHz to 108.0 MHz. After the scan is complete, the device will play the first available station.
  3. Switch Stations
    Press and hold the Volume Up (or Volume Down) button for 2 seconds and the device will play the next available station.
  4. Turn Off The FM Radio
    Click the FM Radio button again to quit.

MOOD LIGHT

This light alarm clock has a total of 15 kinds of colorful mood lights, including 8 kinds of solid color lights and 7 kinds of RGB mood lights.

8 Solid Color Light Modes

  1. Turn The Sunlight On
    Click the Wake-Up Light button to open the sunlight and use it as a night light.
  2. Turn Solid Color Light On
    Press and hold the Wake-Up Light button for 2 seconds to turn on the solid color light. Click the Wake-Up Light button to change the colors of light. There're 8 different color lights in total.
    (Red-Orange-Pink-Green-Blue-lndigo-Purple-Grey)
  3. Intensity Up / Down
    Click Intensity Up (or Intensity Down) button to increase or decrease the intensity of the light. There're 20 levels of brightness.
  4. Turn Off The Solid Color Light Mode
    Press and hold the Wake-Up Light button for 2 seconds to quit.

7 RGB Mood Light Modes

  1. Turn The RGB Mood Light On
    Click the RGB Mood Light Button to turn on the RGB mood light. Click the RGB Mood Light button to change to other RGB Mood Lights. There're 7 different RGB mood lights in total (C01 - C07).
  2. Intensity Up / Down
    Click the Intensity Up (or Intensity Down) button to increase or decrease the intensity of the light. There're 20 levels of brightness.
  3. Turn Off The RGB Mood Light Mode
    Press and hold the RGB Mood Light button for 2 seconds to quit.

MUSIC

This alarm clock has a total of 8 natural sounds. (cricket, campfire in the forest, birds, frogs, seagulls, river, rain, wind chimes)

  1. Turn The Music On
    Click the Music button to turn on the music mode. Click the Music button to change musics. There're 8 natural sounds in total (S01 - S08).
  2. Volume Up / Down
    Click Volume Up (or Volume Down) button to increase or decrease the volume There're 16 levels of volume.
  3. Turn Off The Music Mode
    Press and hold the music button for 2 seconds to quit.

FALL ASLEEP MODE

In fall asleep mode, the light and music will gradually diminish over time until they shut off at the end of the fall asleep duration.
During fall asleep duration, you can turn off the light or music separately.
The longest fall asleep duration can be set to 480 minutes (8 hours), which can almost last for an entire right.

  1. Turn The Fall Asleep Mode On
    Click the Fall Asleep button to turn on the fall asleep mode, the light and the sound will be on. Now, the fall asleep duration is flashing. Please rotate the snooze button to adjust the duration (max 480 minutes).
  2. Fall Asleep Light & Sounds
    You can adjust the light (14 light modes), music (8 sounds & FM radio) or turn it off. Methods for switching the lights and musics or turning it off, please refer to the relevant sections in the manual regarding lights and musics.
  3. Turn Off The Fall Asleep Mode
    Click the Fall Asleep button to view the remaining sleep time. Press and hold the Fall Asleep button for 2 seconds to quit.

SOME TIPS

  1. Turn it on as a night light / reading light
    In order to make it easier for customers to turn the light on in the dark night, we specially designed the function of clicking the Snooze button to turn on the night light.
    It will be a bedside lamp/night light/reading lamp/mood light depending on your needs.
    Note: Click the snooze button again to quit.
  2. Adjust the brightness of the time display
    In order to better adapt to day and night, we have set 4 brightness levels for the time display, from low to high, namely L0/L1/L2/L3,that is, L0 is completely off, and L3 is the highest brightness. Click the Dimmer button to switch between different brightness levels of time display. Worth mentioning is that if you set the time display to L0 level before going to sleep at night, when the alarm goes off in the morning, the time display will automatically revert to L2 brightness.
  3. About the battery compartment
    A CR2032 battery is built in the battery compartment on the back of the alarm clock, which can usually last for many years. There is a way to replace the CR2032 battery, but it can be a little difficult for non-professionals without special tools. In view of this, we do not recommend users to replace it by themselves. If necessary, please contact us via Email.
    *The Fabric version has some differences on the back of the product, with its battery compartment built into the alarm clock.
  4. About the USB output
    We designed a 5VIA USB output port, which can charge mobile phones, tablets and other devices. But please do not connect high-power devices.

FAQ

This section summarizes the most common issues you may have with the wake-up light. If you're unable to resolve the issue referring to the info below, please feel free to contact ThreeDucksDirect@outlook.com for further assistance.

This appliance doesn't work at all

  1. Perhaps the adapter is not inserted properly in the wall outlet. Plug the adapter properly into the wall outlet.
  2. Perhaps there is a power failure. Check if the power supply works by connecting another appliance
    If not, please contact us via Email for further help.

How can I turn the alarm sound off once it has gone off?
Please click the corresponding Alarm button to turn it off. So if you set "Alarm 1", click the Alarm 1 button and it should shut off for that day. Please refer to the "STOP ALARMS" section.

Can I make it so that only the light comes on, not the alarm? (or Can you set the alarm so there is only sound, no light?)

  1. When setting an alarm, the sound volume can be set to OFF, which means that when the alarm goes off, there will be light but no sound.
  2. When setting an alarm, the light intensity can be set to OFF, which means that when the alarm goes off, there will be sound but no light.
    Note: You can't set both light and sound to be "OFF" at the same time.

How can I completely turn off the time display?

You can adjust the brightness of the time display, or turn it off by clicking the Dimmer button. Please refer to the "SOME TIPS" section

Can I completely turn off the alarm so it won't ring any more?
Please note that when you set the alarm 1,the alarm 1 indicator will appear on the panel, which means that the alarm 1 is currently active. If you want to disable alarm 1 completely, you need to manually click the alarm 1 button, and the alarm 1 indicator will disappear, which means you have completely turned off the alarm 1. If you want to reactivate it, click the alarm 1 button again. Please refer to the "STOP ALARMS" section.

I received a product that was damaged/missing part/scratched/dirty.
I apologize for this. Please don't worry, we are committed to providing a lifetime warranty on this product. Please contact us via Email for a brand new replacement.
At the same time, even if you receive the product without any problems, we strongly recommend that you activate your lifetime warranty via Email with your order number, so that we can continue to provide you with the best service and quality.

Contact Us To Activate Your Lifetime Warranty Now!
ThreeDucksDirect@outIook.com
Visit www.jall-us.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download JALL K8 - Sunrise Alarm Clock Manual

Advertisement

Need help?

Need help?

Do you have a question about the K8 and is the answer not in the manual?

Questions and answers

Related Manuals for JALL K8

Save Article as PDF

Table of Contents