Table of Contents
Advertisement
Time Setting (by remote control)
Note: we strongly recommend to set with remote control for the whole setting.
1. Press
to select 12-Hour or 24-Hour mode according to your habits.
2. Press
to turn on AUTO DST, it's for daylight saving time area.
If you don't need it, just ignore this step.
3. Press
to enter the time setting, you will set in sequence for
Hour > Minute > Year > Month > Date
4. The "Hour" is flashing, press
5. Then "Minute" is flashing, press
6. Then "Year" is flashing, press
7. Then "Month" is flashing, press
8. Then "Date" is flashing, press
Press
to finish time setting.
Note: You don't have to set the day of the week. It's calculated automatically.
If you find the day is wrong, it's most likely you've set a wrong "YEAR".
When you turn on Auto DST, time will auto adjust on March and November.
If you don't need auto DST, please turn if off.
to select value. Press
to select value. Press
to select value. Press
to select value. Press
to select value.
and next.
and next.
and next.
and next.
5
Advertisement
Table of Contents
Need help?
Do you have a question about the PH03-RC and is the answer not in the manual?
Questions and answers
i have just bought your clock and the alarm does not ring i have followed the instruction 3 times and still nothing everything else is fine **** i doing something wrong
The alarm on the JALL PH03-RC clock may not be ringing because the alarm mode is set to 1-5 (Monday to Friday), meaning it will not go off on Saturday and Sunday. Check the alarm mode settings and adjust them if needed.
This answer is automatically generated