Casa Systems NetComm CF30 Manual page 20

SET THE OTHER CF30 AS WI-FI SATELLITE
To set one CF30 as the satellite:
Connect the power supply to the CF30.
1.
Push the power button on the back of the Wi-Fi Satellite CF30
2.
to turn it on. Wait a few minutes for it to complete starting up.
3. Connect to the gateway using Wi-Fi or an
Ethernet cable to the yellow LAN port.
4. Open a web browser and type 192.168.20.1
into the address bar, then press Enter.
5. At the login screen, type admin into the Username field. In the
Password field, type the unique Password printed on the label
on the bottom of the gateway, then click the Login > button.
6. Navigate to Wireless > EasyMesh > EasyMesh Interface Setup.
7. On the EasyMesh Interface Setup page, set the satellite:
- Create a Device Name.
- Select the Function as
- Set the preferred System Communications Band as the same
as set for the Wi-Fi Gateway CF30 (5GHz or 2.4GHz).
8. Press the Apply Changes button to set
the CF30 as the Wi-Fi Satellite.
20
Wi-Fi Satellite.