turck TS720 Series Instructions For Use Manual
Processing and display unit
Hide thumbs
Also See for TS720 Series:
- Instructions for use manual (44 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for turck TS720 Series
Summary of Contents for turck TS720 Series
- Page 1 TS720… Processing and Display Unit Instructions for Use...
-
Page 2: Table Of Contents
Connection instructions for thermocouples ............ 24 Connection instructions for resistance thermometers.......... 24 Commissioning.......................... 25 Operation............................ 26 LEDs — operation ...................... 26 Display indications ....................... 27 V01.00 | 2024/08 | 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 3 12.1 Returning devices ...................... 48 13 Disposal.............................. 48 14 Technical data........................... 49 15 Turck branches — contact data .................... 51 V01.00 | 2024/08 | 3 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 4: About These Instructions
If you have any suggestions for improving the design or if some information is missing in the document, please send your suggestions to techdoc@turck.com. V01.00 | 2024/08 | 4 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 5: Notes On The Product
H1 1 4 1 Male connector Assignment Standard-compliant assignment Number of contacts 4 contacts Orientation Straight Design H1 Male connector M12 × 1 V01.00 | 2024/08 | 5 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 6: Scope Of Delivery
Temperature processing and display unit Quick Start Guide Turck service Turck supports you in your projects – from the initial analysis right through to the commission- ing of your application. The Turck product database at www.turck.com offers you several soft- ware tools for programming, configuring or commissioning, as well as data sheets and CAD files in many export formats. -
Page 7: For Your Safety
The product is designed according to state of the art technology. Residual hazards, however, still exist. Observe the following safety instructions and warnings in order to prevent danger to persons and property. Turck accepts no liability for damage caused by failure to observe these safety instructions. -
Page 8: Product Description
12-segment multicolor display and status LEDs. This enables the user to set all essential func- tions and properties directly on the device and read the actual process values and set switching points. V01.00 | 2024/08 | 8 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 9: Operating Principle
[ENTER] touch pad. The [MODE] and [SET] touch pads are used to navigate within programming mode. For more information, refer to the chapter “Setting and parameterization.” V01.00 | 2024/08 | 9 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 10: Legacy Mode
If the process value decreases below the limit value (SP1-Hyst), the switching output becomes inactive. Switching state Hyst Process value Fig. 3: Single point mode V01.00 | 2024/08 | 10 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 11 (SP2-Hyst). If the process value decreases below (SP2- Hyst), the switching output becomes in- active again. Switching state Hyst Hyst Window Process value Fig. 5: Window mode V01.00 | 2024/08 | 11 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 12: Output Functions - Switching Output In Legacy Mode
(SP) and a release point (rP). The minimum hysteresis is 0.2 K. The release point is automatically adjusted if the switching point is changed. hysteresis Fig. 7: Behavior of the switching output (hysteresis function) V01.00 | 2024/08 | 12 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 13: Output Functions - Analog Output
Output behavior of the analog outputs The following figures illustrate the behavior of the analog outputs: analog output process value Fig. 8: Rising output characteristic V01.00 | 2024/08 | 13 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 14 Value of the output when the ASP or AEP is reached Underrun/underrange Overrun/overrange Maximum process value min. Minimum process value V01.00 | 2024/08 | 14 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 15: Io-Link Mode
I/O module, the device detects the pre-defined switching output behavior (PNP/NPN) or the analog output characteristic. The auto detect function is activated by default. V01.00 | 2024/08 | 15 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 16: Technical Accessories
Technical accessories 4.6.1 Connectivity accessories In addition to the above connection cables, Turck also offers other cable types for specific applications with the correct terminals for the device. More information on this is available from the Turck product database at www.turck.de/products... -
Page 17: Temperature Probe
Pt100, class A; measuring range M12 x 1 -50…125 °C; installation length 35 mm; pro- ø 25 cess connection Tri-Clamp 3/4″ ø 8 ø 4 V01.00 | 2024/08 | 17 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 18 Ø 6 × 200 mm TP-206KK1-CF-H1141-L500 100017082 Temperature probe for liquid and gaseous media, type K, class 1 thermocouple; measuring range -40…1100 °C; dimensions Ø 6 × 500 mm V01.00 | 2024/08 | 18 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 19: Compression Fittings And Thermowells
CF-M-6-N1/4-A4 9910484 Compression fitting for direct mounting of temperature probes; probe diameter 6 mm; process connection 1/4″ NPT male thread N1/4" V01.00 | 2024/08 | 19 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 20 G1/2″ external thread; immersion depth 200 mm THW-3-G1/2-A4-L250 9910446 Thermowell for mounting temperature probes; probe diameter 3 mm; process connection G1/2″ external thread; immersion depth 250 mm V01.00 | 2024/08 | 20 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 21: Installing
Optional: Rotate the sensor head within the 340° range to align the connection to the I/O level as well as to ensure optimum operability and readability. V01.00 | 2024/08 | 21 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 22: Connection
Connect the device to the controller or an I/O module as shown in the wiring diagram (see "Electrical connection (PLC)"). V01.00 | 2024/08 | 22 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 23: Wiring Diagrams
Fig. 18: RTD, 2-wire Fig. 19: RTD, 2-wire Resistance thermometer (RTD) — 3-wire Fig. 20: RTD, 3-wire Fig. 21: RTD, 3-wire Fig. 22: RTD, 3-wire V01.00 | 2024/08 | 23 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 24: Connection Instructions For Thermocouples
Keep the cable length as short as possible for a 2-wire circuit. Do not change the circuit types by adding additional bridges to the connector. V01.00 | 2024/08 | 24 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 25: Commissioning
Set the Compatible Device mode in the IO-Link master so that the device changes to Legacy Mode. „ Alternatively, set to Legacy Mode in the Extended Functions menu. V01.00 | 2024/08 | 25 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 26: Operation
NC: Switching point undershot/outside window (active output) switching output NO: Switching point undershot/outside window (inactive output) NC: Switching point exceeded/within window (inactive output) V01.00 | 2024/08 | 26 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 27: Display Indications
No measurement data available PArA Incorrect user parameterization TEMP Device temperature outside the permissible range Unspecified error V01.00 | 2024/08 | 27 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 28: Setting And Parameterization
Fully lock user interface (display and touchpads locked) Lock local parameters (user interface parameters — parameters are displayed but cannot be changed) V01.00 | 2024/08 | 28 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 29: Setting Parameter Values Via Touchpads
LOC LED is yellow. The sensor is automatically locked if the touchpads of the device are not actuated for 1 min. V01.00 | 2024/08 | 29 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 30: Protecting The Sensor With A Password
>3 s Pos. 1 flashes Pos. 2 flashes Pos. 3 flashes Pos. 4 flashes Save new PASS Fig. 29: Password setting V01.00 | 2024/08 | 30 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 31: Setting Via Touchpads - Standard Menu Guidance
In the EF menu, you can select Legacy Mode with its own menu guidance. Standard menu guidance — main menu Process value OUT1 OUT2 DISP Fig. 30: Main menu V01.00 | 2024/08 | 31 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 32 >3 s Current value AUTO Save value >3 s Current value OFF on Save value DOFF Fig. 31: Outputs submenu (OUT…) V01.00 | 2024/08 | 32 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 33 … GrEn r-CW COLr Save value >3 s Current value OFF on Save value CSP1 CSP2 Fig. 32: Display submenu (DISP) V01.00 | 2024/08 | 33 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 34 PASS Software version Process value OPHr >3 s Current value FACT rEBO APPL HIGH UnDO Fig. 33: Extended functions submenu (EF) V01.00 | 2024/08 | 34 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 35: Parameters In The Main Menu
Default: 0.0 s Switch-off delay 0…60 s in increments of 0.1 s (0 = delay time not activated) DOFF Default: 0.0 s V01.00 | 2024/08 | 35 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 36: Parameters In The Disp (Display) Submenu
Green if the process value is between the virtual switching points CSP1 and CSP2 r-CW Red if the process value is between the virtual switching points CSP1 and CSP2 V01.00 | 2024/08 | 36 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 37: Parameters In The Ef Submenu (Extended Functions)
Display of operating hours in years (y), days (d) and hours (h) Password protection Define password and activate password protection PASS 0000 No password Software version Display the firmware version V01.00 | 2024/08 | 37 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 38 Reset the minimum value memory: The lowest process temperature is deleted. UnDO Reset the parameters to the previous settings (last device start) V01.00 | 2024/08 | 38 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 39: Setting Via Touchpads - Legacy Mode
1k-4 1h-4 TC-1 TC-2 TC-3 Save value >3 s Current value Save value Fig. 34: Main menu TS720 in Legacy Mode V01.00 | 2024/08 | 39 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 40 >3 s APPL FACT rEbo >3 s Software version VDMA Save value Fig. 35: Extended functions (EF) submenu in Legacy Mode V01.00 | 2024/08 | 40 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 41 Setting via touchpads — Legacy Mode VDMA menu — main menu Run Mode SP1/FH1 rP1/FL1 SP2/FH2/ASP rP2/FL2/AEP Fig. 36: Main menu in the VDMA menu guidance V01.00 | 2024/08 | 41 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 42 Save value PASS >3 s Software version VDMA Save value Fig. 37: Extended functions (EF) submenu in the VDMA menu guidance V01.00 | 2024/08 | 42 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 43: Legacy Mode - Parameters In The Main Menu
Release point 2 Lower limit value at which output 2 OUT2: Hno/Hnc changes its switching state as the temperature falls Default: 70.0 °C V01.00 | 2024/08 | 43 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 44: Legacy Mode - Parameters In The Ef (Extended Functions) Submenu
0 °C . This drift can be corrected with the offset value. Setting range: -55…+55 °C in increments of 0.1 K. Default: 0.0 °C V01.00 | 2024/08 | 44 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 45 Auto detection (NPN/PNP) output N switching P switching DISr Display orientation 0° Display rotated by 0° 180° Display rotated by 180° V01.00 | 2024/08 | 45 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 46: Setting Via Io-Link
In SIO mode, the device operates in accordance with the most recent set- ting configured in IO-Link mode. V01.00 | 2024/08 | 46 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 47: Troubleshooting
If there are no faults, there is a device malfunction. In this case, decommission the device and replace it with a new device of the same type. V01.00 | 2024/08 | 47 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 48: Maintenance
Disposal The devices must be disposed of properly and do not belong in the domestic waste. V01.00 | 2024/08 | 48 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 49: Technical Data
± 0.3 K (or 0.1 % of scale at > 200 °C) Repetition accuracy – 0.1 K IO-Link IO-Link specification V1.1 Physical transmission layer Corresponds to 3-wire technology (PHY2) V01.00 | 2024/08 | 49 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 50 4-digit 2-color (green/red) 12-segment display, rotatable by 180° Switching state indication 2 × LEDs, yellow Unit display 4 × green LED (°C, °F, K, ohm) V01.00 | 2024/08 | 50 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 51: Turck Branches - Contact Data
Via San Domenico 5, IT-20008 Bareggio (MI) www.turckbanner.it Japan TURCK Japan Corporation ISM Akihabara 1F, 1-24-2, Taito, Taito-ku, 110-0016 Tokyo www.turck.jp V01.00 | 2024/08 | 51 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 52 United Kingdom TURCK BANNER LIMITED Blenheim House, Hurricane Way, GB-SS11 8YT Wickford, Essex www.turckbanner.co.uk Turck Inc. 3000 Campus Drive, USA-MN 55441 Minneapolis www.turck.us V01.00 | 2024/08 | 52 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 53 Over 30 subsidiaries and 60 representations worldwide! 100042254 | 2024/08 100042254 www.turck.com...
Need help?
Do you have a question about the TS720 Series and is the answer not in the manual?
Questions and answers