Cleaning And Servicing; Moisture Sensor - Bosch WQB245ALSN User Manual And Installation Instructions

Starting the intensive appliance
care programme
Requirements
¡ The appliance care programme is
ready. → Page 39
¡ The appliance care programme is
called up. → Page 40
Press ⁠ .
1.
a "CP2" and the programme dura-
tion alternate on the display.
Pour a bottle of the appliance care
2.
product and approx. 1.5 litres of
hot mains water into the condensa-
tion container.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
Insert the condensation container
3.
so that it locks into place.
Press ⁠ .
4.
a The appliance care programme
starts and a signal tone sounds.
a After around 3 hours, the appli-
ance pauses the appliance care
programme and the remaining pro-
gramme duration flashes on the
display.
Pull out the condensation con-
5.
tainer horizontally and empty it.
Pour approx. 1.5 litres of hot
6.
mains water into the condensation
container.
Carefully swivel the condensation
7.
container horizontally and empty it
to rinse out any remaining appli-
ance care product.
Continuing the intensive
appliance care programme
Pour approx. 1.5 litres of hot
1.
mains water into the condensation
container.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
Cleaning and servicing en
Insert the condensation container
2.
so that it locks into place.
Press ⁠ .
3.
a The appliance care programme
continues.
a "End" appears on the display and
a signal tone sounds once the ap-
pliance care programme has
ended.
Pull out the condensation con-
4.
tainer horizontally and empty it.
If you drain the condensation using
5.
the drain hose, remove the stopper
from the underside of the condens-
ation container and insert it into
the recess in the top of the con-
densation container. → Page 39
Insert the condensation container
6.
so that it locks into place.
Put the appliance into standby
7.
mode. → Page 31

Cleaning and servicing

18 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
18.1 Moisture sensor
The moisture sensor in this appliance
measures how damp the laundry is
during the drying cycle. The appli-
ance changes the duration of the
automatic programme depending on
the residual moisture in the laundry.
Cleaning the moisture sensor
Over time, residue from limescale,
detergents and care products can
build up on the moisture sensor.
Clean the moisture sensor regularly.
41